[1] |
章梓雄, 董曾南. 粘性流体力学[M]. 北京: 清华大学出版社有限公司, 1998.
|
[2] |
汪殿龙, 张志洋, 梁志敏, 等. 交流CMT动态电弧特征及熔滴过渡行为分析[J]. 焊接学报, 2014, 35(3): 6-10. Wang Dianlong, Zhang Zhiyang, Liang Zhimin, et al. Analysis on AC CMT dynamic arc characteristics and droplet transition behavior[J]. Transactions of the China Welding Institution, 2014, 35(3): 6-10.
|
[3] |
张洪涛, 冯吉才, 何 鹏, 等. 镀锌层对铝/镀锌钢板CMT熔-钎焊电弧加热行为的影响[J]. 焊接学报, 2009, 30(8): 37-40. Zhang Hongtao, Feng Jicai, He Peng, et al. Effect of galvanized layer on arc behavior of aluminum/galvanized steel CMT melt-brazing[J]. Transactions of the China Welding Institution, 2009, 30(8): 37-40.
|
[4] |
Pickin C G, Williams S W, Lunt M. Characterisation of the cold metal transfer (CMT) process and its application for low dilution cladding[J]. Journal of Materials Processing Technology, 2011, 211(3): 496-502.
|
[5] |
Pincus S M. Approximate entropy as a measure of system complexity[J]. Proceedings of the National Academy of Sciences, 1991, 88(6): 2297-2301.
|
[6] |
张瑞华, 尹 燕. 活性剂钨极惰性气体保护电弧焊接熔池行为的观察[J]. 机械工程学报, 2009, 45(3): 115-118. Zhang Ruihua, Yin Yan. Observation of pool behavior with activating flux TIG welding[J]. Chinese Journal of Mechanical Engineering, 2009, 45(3): 115-118.
|
[7] |
路 浩, 邢敬伟, 邢立伟, 等. 活性MAG焊电弧特征及熔池流动分析[J]. 焊接学报, 2014, 35(10): 41-44, 115. Lu Hao, Xing Jingwei, Xing Liwei, et al. Analysis of arc characteristic and pool flow in active MAG welding[J]. Transactions of the China Welding Institution, 2014, 35(10): 41-44, 115.
|
[8] |
闫志鸿, 张广军, 邱美珍, 等. 脉冲熔化极气体保护焊熔池图像的检测与处理[J]. 焊接学报, 2005, 26(2): 37-40. Yan Zhihong, Zhang Guangjun, Qiu Meizhen, et al. Detection and processing of pulsed MIG welding pool image[J]. Transactions of the China Welding Institution, 2005, 26(2): 37-40.
|
[9] |
张文钺. 焊接冶金学(基本原理)[M]. 北京: 机械工业出版社, 1999.
|