| [1] |
周万盛， 姚君山. 铝及铝合金的焊接[M]. 北京： 机械工业出版社， 2006.[2] Shiganov L N, Kholopov A A, Oda E I. Special features of laser welding of aluminium alloys[J]. Welding International， 2012， 26(3): 231-235.[3] Tu J F， Paleocrassas A G. Fatigue crack fusion in thin-sheet aluminum aloys AA7075-T6 using low-speed fiber laser welding[J]. Journal of Materials Processing Technology， 2011， 211(1): 95-102．[4] 钱红丽, 周 琦, 陈 俐, 等. 2024铝合金光纤激光焊接头力学性能研究[J]. 焊接, 2013(3): 31-33.Qian Hongli, Zhou Qi, Chen Li,et al. Mechanical properties of fiber laser welded 2024 Al alloy joints[J]. Welding & Jointing, 2013(3): 31-33.[5] 张国伟, 肖荣诗. 5083铝合金厚板超窄间隙光纤激光焊接接头组织与性能[J]. 中国激光, 2014, 41(9): 102-108.Zhang Guowei, Xiao Rongshi. Microstructure and mechanical properties of 5083 aluminum alloy joint of heavysection by ultra-narrow gap fiber laser beam welding[J]. Chinese Journal of Lasers, 2014, 41(9): 102-108.[6] 张智慧, 董世运, 王玉江,等. 7A52铝合金光纤激光焊接接头组织与性能研究[J]. 应用激光, 2014, 34(6): 567-571.Zhang Zhihui, Dong Shiyun, Wang Yujiang,et al. Microstructure and properties of fiber laser welded 7A52 Al alloy joints[J]. Applied Laser, 2014, 34(6): 567-571.[7] 钱红丽, 周 琦, 陈 俐, 等. 7A52铝合金光纤激光焊接头组织性能分析[J]. 焊接, 2014(9): 49-52.Qian Hongli, Zhou Qi, Chen Li,et al. Microstructure and properties of fiber laser welded 7A52 Al alloy joints[J]. Welding & Jointing, 2014(9): 49-52.[8] Macchi C E, Somoza A, Dupasquier A,et al. Secondary precipitation in Al-Zn-Mg-(Ag) alloys[J]. Acta Materialia, 2003, 51(17): 5151-5158.[9] 张 坤, 刘志义, 郑青春, 等. 高Zn超高强铝合金的回归再时效处理[J]. 中南大学学报(自然科学版), 2005, 36(2): 188-192.Zhang Kun, Liu Zhiyi, Zheng Qingchun,et al. Effects of different retrogression and reaging heattreatment on high-zinc super-high aluminum alloy[J]. Journal of Central South University of Technology(Natural Science), 2005, 36(2): 188-192.[10] 尹志民, 方家芳, 黄继武, 等. 时效工艺对7A52铝合金晶间腐蚀和剥蚀行为的影响[J]. 中南大学学报(自然科学版), 2007(4): 617-622.Yin Zhimin, Fang Jiafang, Huang Jiwu,et al. Effects of aging treatment on intercrystalline corrosion andexfoliation corrosion behavior of 7A52 aluminum alloy[J]. Journal of Central South University of Technology(Natural Science), 2007(4): 617-622.[11] 黄继武, 尹志民, 聂 波, 等. 双级时效对7A52铝合金组织与性能的影响[J]. 中南大学学报(自然科学版), 2007(6): 1045-1049.Huang Jiwu, Yin Zhimin, Nie Bo,et al. Effects of duplex ageing conditions on microstructures andproperties of 7A52 alloy[J]. Journal of Central South University(Science and Technology), 2007(6): 1045-1049.
|
下载:
