片式电容Sn96.5/Ag3/Cu0.5焊点热疲劳性能比较

毛书勤; 刘剑; 葛兵

片式电容Sn96.5/Ag3/Cu0.5焊点热疲劳性能比较

1.
长春光学精密机械与物理研究所, 长春 130031;中国科学院大学, 北京 100039
2.
长春光学精密机械与物理研究所, 长春 130031

基金项目: 吉林省科技发展计划资助项目（20126016）

计量
- 文章访问数: 332
- HTML全文浏览量: 39
- PDF下载量: 121
出版历程
- 收稿日期: 2015-01-07

Comparative studies on thermal fatigue performance to Sn96.5/Ag3/Cu0.5 solder joints of chip capacitor

1.
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130031, China;University of Chinese Academy of Sciences, Beijing 100039, China
2.
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130031, China

摘要

摘要: 以0805封装片式电容器件焊点为研究对象，建立了多周期温度冲击下Sn96.5/Ag3/Cu0.5的焊点有限元分析模型，开展了多周期温度冲击条件下焊点剪切力测试工作，获得了Sn96.5/Ag3/Cu0.5和Sn63/Pb37两种焊点的周期-剪切力测试数据，并利用非线性最小二乘法得到了1 500个周期内的焊点热疲劳状态拟合曲线.结果表明，在规定试验条件下，在有限的1 500个周期内0805封装电容的Sn96.5/Ag3/Cu0.5焊点的热疲劳劣化速率略慢于Sn63/Pb37焊点.
- 片式焊点 /
- 热疲劳状态 /
- 剪切力
Abstract: With the use of Pb in a variety of occasions prohibited, Lead-free technology becomes one of important research direction. For understanding the fatigue properties of lead-free solder, there is important significance to analyse fanalyse state of lead-free solders and to research on the method of testing. With the 0805 chip capacitor device package solder joints as the research object, Sn96.5/Ag3/Cu0.5 solder joints finite element model is established for multi period under temperature cycles. And shearing test is carried out. The value of Period-shearing stress to Sn96.5/Ag3/Cu0.5 and Sn63/Pb37 solders is obtained. Thermal fatigue fitting curves of solder in 1 500 periods is acquired, by using nonlinear least square method to fit curves. The results indicates that under the stipulated test condition, in limited 1 500 periods, thermal fatigue performance of Sn96.5/Ag₃/Cu0.5 solder joints' rate of thermal fatigue deterioration to 0805 capacitance is slightly slower than that of Sn63/Pb37 solder joints.
- chip component soldering joint /
- thermal fatigue state /
- shearing force

HTML全文

参考文献(8)

[1]	周斌,邱宝军,罗道军. 片式元件焊点的热循环应力应变模拟技术研究[J].电子元件与材料,2008,27(7):58-61. Zhou Bin, Qiu Baojun, Luo Daojun. Study on simulation technology of stress-strain for chip component soldering joint under thermal cycles [J]. Electronic Components and Materials, 2008, 27(7): 58-61.
[2]	王斌, 黄春跃, 李天明. 热循环加载片式元器件带空洞无铅焊点的可靠性[J]. 电子元件与材料, 2011, 30(6): 66-69. Wang Bin, Huang Chunyue, Li Tianming. Reliability of chip components lead-free solder joints with voids under thermal cycle[J]. Electronic Components and Materials, 2011, 30(6): 66-69.
[3]	魏鹤琳, 王奎升. 考虑IMC影响的PBGA无铅焊点温度循环有限元数值模拟[J]. 焊接学报, 2012, 33(1): 109-112. Wei Helin, Wang Kuisheng. Numerical simulation of PBGA lead-free solder joints with consideration of IMC layer under thermal cycling condition[J]. Transactions of the China Welding Institution, 2012, 33(1): 109-112.
[4]	吴玉秀, 薛松柏, 张玲, 等. QFP组件的优化模拟及焊点热疲劳寿命的预测[J]. 焊接学报, 2006, 27(8): 99-102. Wu Yuxiu, Xue Songbai, Zhang Ling, et al. Optimum simulation and prediction on thermal fatigue life of soldered joints of QFP devices[J]. Transactions of the China Welding Institution, 2006, 27(8): 99-102.
[5]	Basaran C, Desai C S, Kundu T. Thermal mechanical finite element analysis of problems in electronic packaging using the disturbed state concept[J]. ASEM Journal of Electronic Packaging, 1998, 120 (2): 41-53.
[6]	Lee S W, Zhang X. Sensitivity study on material properties for the fatigue predication of solder joints under cyclic thermal loading[J]. Circuit World, 1998, 24(3): 26- 31.
[7]	胡永芳, 薛松柏, 禹胜林. QFP结构微焊点强度的试验[J]. 焊接学报, 2005, 26(10): 78- 80. Hu Yongfang, Xue Songbai, Yu Shenglin. Study on strength of soldered microjionts of QFP decices[J]. Transactions of the China Welding Institution, 2005, 26(10): 78-80.
[8]	刘焱, 接勐, 谢海峰, 等. 共振型气体泵用压电振子的疲劳寿命[J]. 光学精密工程, 2013, 21(4): 941-947. Liu Yan, Jie Meng, Xie Haifeng, et al. Fatigue life of piezoelectric actuator used in resonance-type air pump[J]. Optics and Precision Engineering, 2013, 21(4): 941-947.

施引文献

资源附件(0)

计量

文章访问数: 332
HTML全文浏览量: 39
PDF下载量: 121
被引次数: 0

片式电容Sn96.5/Ag3/Cu0.5焊点热疲劳性能比较

计量

出版历程

Comparative studies on thermal fatigue performance to Sn96.5/Ag3/Cu0.5 solder joints of chip capacitor

计量

出版历程

目录