石墨/镍基金属钎涂层界面结构分析及性能

杨蒙瑶; 陈焕文; 郭建军; 曹广忠; 毛斐

石墨/镍基金属钎涂层界面结构分析及性能

1.
深圳大学深圳陶瓷制备先进技术工程实验室, 深圳 518107
2.
深圳龙岗联合焊接公司, 深圳 518100

基金项目: 深圳市电磁控制重点实验室基金资助项目（EMCKF201405）；深圳市龙岗区产学研合作项目（CXY2012006）

计量
- 文章访问数: 310
- HTML全文浏览量: 2
- PDF下载量: 109
出版历程
- 收稿日期: 2015-01-11

Microstructures analysis and performance research of graphite/nickel-based brazing coating

1.
Shenzhen Advanced Technology Engineering Laboratory of Fabrication of Ceramic, Shenzhen University, Shenzhen 518107, China
2.
Shenzhen Longgang Joint Welding Company, Shenzhen 518100, China

摘要

摘要: 电机行业中石墨有重要的作用，在镍基焊料中加入适量活性金属，并通过创新的钎涂方法制备石墨表面的钎焊层，以实现石墨与电机换向器中铜转子更牢固的连接，使得原本与铜直接接触的石墨电刷的磨损量大大降低.通过DSC，XRF，SEM，EDS，XRD，超声C-扫描探伤以及电阻测试等试验检测钎焊层的性能.结果表明，钎料自身生成了金属间化合物，并且钎料中的Si和Cr元素与石墨生成了碳化物，从而使得钎料与石墨之间形成了牢固的冶金结合，样品经钎涂后不影响其作为电刷材料的导电性.
- 石墨 /
- 镍基焊料 /
- 钎涂 /
- 金属化 /
- 界面结构
Abstract: Graphite is playing an important role in motor industry. A moderate amount of active metals were added into nickel-based solder, an innovative coating method was used to prepare the brazing layer on the surface of graphite, which realized the firmer connection between graphite and copper rotor in the motor commutators, and reduced the abrasion loss of the graphite brush which directly contact with copper originally. By using the DSC, XRF, SEM, EDS, XRD, ultrasonic C-inspection and resistance test,the performances of the brazing layer were analyzed. It is shown that not only the solder itself generated the intermetallic compounds, but also Si and Cr in the solder reacted with graphite turned into carbide, which made a strong metallurgical bond between graphite and solder, which does not affect its electrical conductivity as the brush after brazing.
- graphite /
- nickel-based solder /
- brazing coating /
- metallization /
- interface structure

HTML全文

参考文献(10)

[1]	Garcia-Marquez J M, Anton N, Jimenez A, et al. Viability study and mechanical characterisation of copper-graphite electrical contacts produced by adhesive joining[J]. Journal of Materials Processing Technology, 2003, 143(1):290-293.
[2]	程小爱, 曹晓燕, 张慧玲,等. 石墨表面金属化处理及检测[J]. 表面技术, 2006, 35(3):4-7. Cheng Xiaoai,Cao Xiaoyan, Zhang Huiling, et al. Metal-modification and detection of graphite surface[J]. Surface Technology, 2006, 35(3):4-7.
[3]	谢凤春, 何鹏, 冯吉才. 钛基非晶态钎料钎焊高强石墨与铜的界面特征[J]. 焊接学报, 2008, 29(3):73-76. Xie Fengchun, He Peng, Feng Jicai. Interface character of high-strength graphite and copper joints brazed with Ti-basedamorphous filler metal[J]. Transactions of the China Welding Institution, 2008, 29(3):73-76.
[4]	孙柏洲, 张淮. 小议真空钎焊技术的应用研究[J]. 今日科苑, 2007(22):71. Sun Bozhou, Zhang Huai. Discussion of vacuum brazing technology application[J]. Modern Science. 2007, 22:71.
[5]	崔彤, 崔振刚, 刘艳明, 等. 一种新型镍基薄带钎焊料的焊接接头的组织与性能[J]. 有色矿冶, 2006, 22(1):35-38. Cui Tong, Cui Zhengang, Liu Yanming, et al. The microstructures and properties of welding joint made from a Ni-base thin strip material[J]. Non-Ferrous Mining and Metallurgy, 2006,22(1):35-38.
[6]	刘仕福, 沈以赴, 王少刚. 石墨表面钛金属化微观组织分析[J], 焊接学报, 2005, 26(12):89-92. Liu Shifu, Shen Yifu, Wang Shaogang. Microstructure analyse of surface Ti-metallized graphite[J]. Transactions of the China Welding Institution, 2005,26(12):89-92.
[7]	沈以赴, 刘仕福, 李军伟, 等. W与Cu合金瞬时液相连接分析[J], 焊接学报, 2005, 26(12):73-76. Shen Yifu, Liu Shifu, Li Junwei, et al. Instantaneous W and Cu alloy liquid phase analysis[J]. Transactions of the China Welding Institution, 2005, 26(12):73-76.
[8]	宋艳. 钎焊[M].哈尔滨:哈尔滨工业大学出版社,2012.
[9]	Qi Huafan, Fernandes A, Gracio, et al. Diamond coating on steel with a titanium interlayer[J]. Diamond and Related Materials, 1998, 7(2):603-606.
[10]	化工部常州涂料化工研究院. GB/T 9286-1998, 色漆和清漆、漆膜的划格试验[S]. 北京:全国涂料和颜料标准化技术委员会, 1998年.

施引文献

资源附件(0)

计量

文章访问数: 310
HTML全文浏览量: 2
PDF下载量: 109
被引次数: 0

石墨/镍基金属钎涂层界面结构分析及性能

计量

出版历程

Microstructures analysis and performance research of graphite/nickel-based brazing coating

计量

出版历程

目录