高级检索

镁/钢异种金属CMT对接熔钎焊连接机理

曹睿, 朱海霞, 王清, 董闯, 林巧力, 陈剑虹

曹睿, 朱海霞, 王清, 董闯, 林巧力, 陈剑虹. 镁/钢异种金属CMT对接熔钎焊连接机理[J]. 焊接学报, 2016, 37(5): 37-40.
引用本文: 曹睿, 朱海霞, 王清, 董闯, 林巧力, 陈剑虹. 镁/钢异种金属CMT对接熔钎焊连接机理[J]. 焊接学报, 2016, 37(5): 37-40.
shu
CAO Rui, ZHU Haixia, WANG Qing, DONG Chuang, LIN Qiaoli, CHEN Jianhong. Joining mechanisms of Mg-steel butt welded joints by cold metal transfer method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 37-40.
Citation: CAO Rui, ZHU Haixia, WANG Qing, DONG Chuang, LIN Qiaoli, CHEN Jianhong. Joining mechanisms of Mg-steel butt welded joints by cold metal transfer method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 37-40.
shu

镁/钢异种金属CMT对接熔钎焊连接机理

  • 1.

    兰州理工大学有色金属先进加工与再利用省部共建国家重点实验室, 兰州 730050

  • 2.

    大连理工大学三束材料改性教育部重点实验室, 大连 116024

基金项目: 973计划前期研究专项(2014CB660810),国家自然科学基金资助项目(51265028)及大连理工大学三束材料改性教育部重点实验室开放基金资助资目(LABKF1402)

Joining mechanisms of Mg-steel butt welded joints by cold metal transfer method

  • 1.

    State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metal, Lanzhou University of Technology, Lanzhou 730050, China

  • 2.

    Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Ministry of Education, Dalian University of Technology, Dalian 116024, China

摘要

    摘要
  • 摘要: 文中用AZ61镁焊丝以及冷金属过渡焊接方法对接形式连接镁合金AZ31和镀锌钢板,在焊接过程中保持焊接速度不变,通过调节送丝速度和对钢板开不同的坡口研究不同焊接工艺参数下焊缝的表面成形、接头的力学性能和微观组织结构. 结果表明,通过调节合适的焊接参数以及坡口形式,镁-钢之间能形成焊缝成形美观、接头最大抗拉载荷达到4.02 kN的镁钢对接熔钎焊接头. 并且熔钎焊接头包括镁侧的熔焊接头和钢侧的钎焊接头,钎焊接头由两部分组成,一部分是坡口面上的镁与裸钢板之间的钎焊接头,另一部分是镀锌钢板上表面的镁-镀锌钢之间的钎焊接头. 镁-镀锌钢侧的钎焊连接主要由靠近镁侧的(α-Mg+MgZn)的共晶相,以及靠近钢侧的Fe-Al相反应层实现连接. 无镀锌层的钢和镁连接主要依靠焊丝中的微量Al元素扩散到钢表面形成Fe/Al相来实现连接.
    Abstract: In this paper, Mg AZ31 sheet and galvanized steel sheet were butt welded and joined by cold metal transfer method with AZ61 Mg wire. Weld appearance, tensile properties and microstructure of Mg-steel butt joints at various welding parameters were investigated by changing wire feed speeds and groove angles. Results indicated that Mg-steel brazed-welded joints with good weld appearance and 4.02kN of tensile load can be achieved. And the brazed-welded joint is composed of welded joint at Mg side and brazed joint at steel side. The brazed joint is made of two parts, one is Mg-galvanized steel brazed joint which is located at the top of galvanized steel sheet, and the other is Mg-bare steel brazed joint which is located at the groove side. The Mg-galvanized steel joint brazed interface is composed of two reaction layers with -Mg+MgZn eutectic phase and Fe/Al reaction layer. The Mg-bare steel brazed interface at the groove side is composed of Fe/Al reaction layer, and Fe/Al phase is diffused and reacted by Al element of the Mg wire and Mg base metal.
    • HTML全文
    • 参考文献(8)
  • [1] 孙景林, 郭 静. 镁合金在汽车轻量化方面的应用[J]. 轻金属, 2008, 7: 58-60. Sun Jinglin, Guo Jing. Application of magnesium alloy to popularization of lightweight automobiles[J]. Lightweight Alloys, 2008, 7: 58-60.
    [2] Chen Y C, Nakata K. Effect of surface states of steel on microstructure and mechanical properties of lap joints of magnesium alloy and steel by friction stir welding[J]. Science and Technology of Welding and Joining, 2010, 5(4): 293-298.
    [3] Liu L, Qi X. Strengthening effect of nickel and copper interlayers on hybrid laser-TIG welded joints between magnesium alloy and mild steel[J]. Materials Design, 2010, 31(8): 3960-3963.
    [4] Liu L, Xiao L, Feng J C, et al. The mechanisms of resistance spot welding of magnesium to steel[J]. Metallurgical and Materials Transactions A, 2010(41): 2651-2661.
    [5] Waled M. Elthalabawy, Tahir I Khan. Microstructural development of diffusion brazed austenitic stainless steel to magnesium alloy using a nickel interlayer[J]. Materials Characterization, 2010, 61: 703-712.
    [6] Li Liqun, Tan Caiwang, Chen Yanbin, et al. Influence of Zn coating on Interfacial reactions and mechanical properties during laser welding-brazing of Mg to steel[J]. Metallurgical And Materials Transcations A, 2012, 12(43A): 4740-4754.
    [7] 曹 睿, 余建永, 陈剑虹, 等. 镁/镀锌钢板CMT熔钎焊连接机制分析[J]. 焊接学报, 2013, 34(9): 21-34. Cao Rui, Yu Jianyong, Chen Jianhong, et al. Bonding mechanism of CMT fusion-brazed joints between magnesium and galvanized steel[J]. Transactions of the China Welding Institution, 2013, 34(9): 21-34.
    [8] Cao R, Zhu H X, Wang Q, et al. Effects of zinc coating on magnesium alloy-steel joints produced by cold metal transfer method[J]. Materials Science and Technology, 2016, 1-13. DOI: 10. 1080/02670836. 2016. 1148107.
    • 相关文章
    • 施引文献(14)

  • 期刊类型引用(7)

    1. 白云龙，冷冰，韦博鑫，董立谨，于长坤，许进，孙成. 掺氢天然气管材及焊缝的氢损伤行为研究进展. 中国腐蚀与防护学报. 2025(02): 283-295 . 百度学术
    2. 孟不凡，赵建平. X80钢补焊残余应力影响下的氢扩散模拟. 电焊机. 2023(06): 83-91 . 百度学术
    3. 刘雪，钟史放，徐连勇，赵雷，韩永典. 不同应力幅下X65管线钢焊接接头的腐蚀疲劳行为. 焊接学报. 2023(07): 24-31+78+130 . 本站查看
    4. 薛钢. 基于Mises屈服准则和I_1断裂准则的焊接接头力学特性分析. 材料开发与应用. 2022(05): 1-10 . 百度学术
    5. 田万鹏. 基于SYSWELD的X80管线钢焊接接头温度场的数值模拟. 机械工程师. 2020(12): 70-72 . 百度学术
    6. 张根树，张颖. 2.25Cr1Mo0.25V钢非拘束焊接接头焊后热处理. 一重技术. 2018(02): 44-47+60 . 百度学术
    7. 赵朋成，刘振伟，王璐璐，高世一，王振民. X65管线钢管闪光对焊工艺参数对焊接接头力学性能和缺陷的影响. 材料导报. 2017(20): 87-91 . 百度学术

    其他类型引用(7)

    • 资源附件(0)
计量
  • 文章访问数:  563
  • HTML全文浏览量:  34
  • PDF下载量:  345
  • 被引次数: 14
出版历程
  • 收稿日期:  2015-11-06

目录

摘要
HTML全文
    参考文献(8)
    相关文章
    施引文献(14)
    资源附件(0)

    /

    返回文章
    返回

    网站版权 © 焊接杂志社焊接学报编辑部电话：0451-86323218地址：哈尔滨市松北区创新路2077号

    本系统由 北京仁和汇智信息技术有限公司 开发  百度统计