铝合金DPMIG与TPMIG焊接头组织和性能的对比

廖天发; 金礼; 朱强; 薛家祥

铝合金DPMIG与TPMIG焊接头组织和性能的对比

1.
华南理工大学机械与汽车工程学院, 广州 510641;惠州学院电子科学系, 惠州 516007
2.
华南理工大学机械与汽车工程学院, 广州 510641

基金项目: 广东省省部产学研资助项目(2013B090600098)

计量
- 文章访问数: 695
- HTML全文浏览量: 6
- PDF下载量: 326
出版历程
- 收稿日期: 2015-12-30

Comparison of the properties of aluminum alloy welding joint between DPMIG and TPMIG

1.
South China University of Technology, School of Mechanical and Automotive Engineering, Guangzhou 510641, China;Huizhou University, Department of electronic engineering, Huizhou 516007, China
2.
South China University of Technology, School of Mechanical and Automotive Engineering, Guangzhou 510641, China

摘要

摘要: 采用DPMIG焊和TPMIG焊焊接工艺,对比研究了不同参数对AA6061铝合金焊接性能的影响.运用小波分析仪检验焊接过程的稳定性.利用光学显微镜和电子拉伸试验机,研究了DPMIG焊和TPMIG焊焊接接头的显微组织和拉伸性能.结果表明,TPMIG焊和DPMIG焊焊接过程稳定,电流电压波形周期性变化,重复性好. TPMIG焊的动态电阻和输入能量的高低变化更为有序,得到了比DPMIG焊更为美观的鱼鳞纹焊缝.不同焊接速度下,与DPMIG焊相比,TPMIG焊熔合区的气孔和裂纹等缺陷均较少,拉伸强度均有所增加,说明TPMIG焊是一种较DPMIG焊更为优良的焊接方法.
- 梯形波焊 /
- 双脉冲焊 /
- 显微组织 /
- 拉伸性能
Abstract: With the DPMIG and TPMIG welding methods, the effect of different parameters on the welding performance of AA6061 aluminum alloy is studied in this paper. The stability of the welding process is verified with a wavelet analyzer, the microscopic structure and tensile property of the welding joint of the DPMIG and TPMIG methods is studied using a optical microscope and a electrical tensile test machine. The test results show that the welding processes of the TPMIG and DPMIG methods are both stable, and the voltage and current waves are both periodic and repeatable. But the variations of the dynamic resistance and intake energy of the TPMIG method are more ordered. The ripple weld seam of the TPMIG method is better than that of the DPMIG method, as well as less defect such as stoma and crack and better tensile property under different welding speed, showing that the TPMIG is a better welding method than the DPMIG method.
- DPMIG /
- TPMIG /
- microscopic structure /
- tensile property

HTML全文

参考文献(8)

[1]	叶拓, 王冠, 姚再起, 等. 汽车用6xxx系铝合金薄壁件的韧性断裂行为[J]. 中国有色金属学报, 2014, 24(4):878-887. Ye Tuo, Wang Guan, Yao Zaiqi, et al. Ductile fracture behavior of 6xxx aluminum alloy thin-walled components of automobile[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(4):878-887.
[2]	戴启雷, 王秀义, 侯振国, 等. 焊接速度对AA6082搅拌摩擦焊接头根部缺陷及性能的影响[J]. 焊接学报, 2015, 08:27-30. Dai Qilei, Wang Xiuyi, Hou Zhenguo, et al. Effect of travel speed on the root-defects and mechanical properties of friction stir welded A6082 alloy joint[J]. Transactions of the China Welding Institution, 2015, 08:27-30.
[3]	Goyal, V.K., P.K. Ghosh, et al. Influence of pulse parameters on characteristics of bead-on-plate weld deposits of aluminum and its alloy in the pulsed gas metal arc welding process[J]. Metallurgical and Materials Transactions, 2008, 39(13):3260-3275.
[4]	彭云, 许良红, 田志凌, 等. 焊接热输入对高强铝合金接头组织和性能的影响[J]. 焊接学报, 2008, 2:17-21. Peng Yun, Xu Lianghong, Tian Zhiling, et al. Effect of heat input on microstructure and mechanical properties of the high strength aluminum alloy welds[J]. Transactions of the China Welding Institution, 2008, 2:17-21.
[5]	殷树言. 气体保护焊工艺基础及应用[M]. 北京:机械工业出版社, 2012.
[6]	姚屏, 薛家祥, 蒙万君, 等. 工艺参数对铝合金双脉冲MIG焊焊缝成形的影响[J]. 焊接学报, 2009, 30(3):69-72. Yao Ping, XUE Jiaxiang, Meng Wanjun, et al. Influence of processing parameters on weld forming in doublepulse MIG welding of aluminum alloy[J]. Transactions of the China Welding Institution, 2009, 30(3):69-72.
[7]	Anhua Liu, Xinhua Tang, Fenggui Lu. Study on welding process and prosperities of AA5754 Al-alloy welded by double pulsed gas metal arc welding[J]. Materials and Design, 2013, 50:149-155.
[8]	Wang L L, Jin L, Huang W J, et al. Effect of thermal frequency on AA6061 aluminum alloy double pulsed gas metal arc welding[DB/OL]. Materials and Manufacturing Processes, 2015. DOI: 10.1080/10426914.2015.1103863.