高级检索

微量元素对无铅焊点电迁移性能的改善

王家兵, 孙凤莲, 刘洋

王家兵, 孙凤莲, 刘洋. 微量元素对无铅焊点电迁移性能的改善[J]. 焊接学报, 2012, (2): 29-32.
引用本文: 王家兵, 孙凤莲, 刘洋. 微量元素对无铅焊点电迁移性能的改善[J]. 焊接学报, 2012, (2): 29-32.
WANG Jiabing, SUN Fenglian, LIU Yang. Improvement electromigration resistance of Pb-free solder joints with element addition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (2): 29-32.
Citation: WANG Jiabing, SUN Fenglian, LIU Yang. Improvement electromigration resistance of Pb-free solder joints with element addition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (2): 29-32.

微量元素对无铅焊点电迁移性能的改善

基金项目: 国家自然科学基金资助项目(5107510751174069);黑龙江省自然基金重点项目(15008002-09034);哈尔滨市优秀学科带头人基金资助项目(2008RFXXG010)

Improvement electromigration resistance of Pb-free solder joints with element addition

  • 摘要: 电迁移现象已经成为电子组装焊技术中最受关注的问题之一.焊点在高电流密度下的服役可靠性与焊点钎料成分有关.通过对比分析五种SnAgCu基无铅焊点在高电流密度下的服役表现,分析了添加微量元素对于电迁移现象的影响规律.结果表明,焊球承受一定电流作用之后,阴极金属间化合物(IMC)分解,铜焊盘受侵蚀,阳极形成大量脆性化合物Cu6Sn5;根据IMC层的厚度变化,Sn3.0Ag0.5Cu的抗电迁移性能优于低银钎料;向低银钎料中加入微量元素Bi和Ni后,晶粒得到了明显的细化,界面IMC层较薄,其抗电迁移的能力得到了明显的改善.
    Abstract: Electromigration has become the most important concern for solder joint in electronic assembly.The solder joint durability under high current density stressing is highly dependent on the solder materials compositions.In this paper,the electromigration of five types of Sn based solder material were observed and compared.The influence of elements addition on solder electromigration were investigated.The results indicated that intermetallic compounds(IMC) was formed near the cathode disappeared after electromigration tests,and the copper layer at the cathode was consumed significantly.A large amount of Cu6Sn5 IMC were observed at the anode of the solder interconnects.Considering the IMC layer thickness as a criterion of electromigration durability,Sn3.0Ag0.5Cu solder performed better than low-Ag solder.By adding elements of Bi and Ni into the low-Ag solder,the solder microstructure were refined.The IMC accumulating near anode became thinner and electromigration resistance was improved significantly.
  • 期刊类型引用(10)

    1. 常青,杨程伟,罗彬杰,李细峰. 基于小波变换的扩散焊超声C图像融合算法. 郑州大学学报(工学版). 2023(04): 54-59+87 . 百度学术
    2. 王宪,罗彬杰,蒋音盈. 基于包络和极值约束的超声混叠信号稀疏分解. 上海第二工业大学学报. 2023(04): 351-358 . 百度学术
    3. 金士杰,杨雅喃,田鑫,史思琪,林莉. 微流控芯片流道特征超声C扫描分析. 应用声学. 2023(06): 1123-1128 . 百度学术
    4. 王海登,鄂楠,张智柏,刘向前. 扩散焊缺陷超声波检测信号特征. 焊接技术. 2021(02): 92-95+106 . 百度学术
    5. 周李洪,龚金科,李兵. 基于Gabor小波的汽车金属材料表面微小缺陷快速识别. 中南大学学报(自然科学版). 2021(04): 1099-1108 . 百度学术
    6. 董瑞琴,王婵,陈明,马啸啸,陈尧. 窄腹板扩散焊相控阵超声检测工艺探究. 无损探伤. 2021(05): 9-13 . 百度学术
    7. 张斌,于润桥,刘怡,胡博. 钛合金扩散焊微小缺陷弱磁检测试验研究. 中国测试. 2020(03): 6-11 . 百度学术
    8. 王斌,李升,朱富慧,李细锋. 基于超声无损检测的扩散连接界面缺陷尺寸评估. 焊接学报. 2020(08): 34-38+99 . 本站查看
    9. 李文涛,周正干. 一种复杂结构件圆柱面扩散焊缝阵列超声检测方法. 机械工程学报. 2020(22): 1-7 . 百度学术
    10. 迟大钊,齐聪成. 国内焊接缺陷声学无损检测研究综述. 精密成形工程. 2018(01): 74-81 . 百度学术

    其他类型引用(7)

计量
  • 文章访问数:  356
  • HTML全文浏览量:  2
  • PDF下载量:  102
  • 被引次数: 17
出版历程
  • 收稿日期:  2010-12-07

目录

    /

    返回文章
    返回