大型双湿式搅拌机螺旋轴焊接的数值模拟

基金项目: 国家863高技术研究发展计划资助项目(2007AA04Z135);江苏省高校自然科学基金资助项目(08KJD460002)

Simulation of rotation screw shaft welding of scale wet-type stirring mill

1.
Changzhou Institute of Technology, Changzhou 213002, China
2.
Changzhou Key Laboratory of Nontraditional Machining, Changzhou 213002, China

摘要: 借助三维建模软件和有限元分析软件,通过数值模拟手段,全面细致地模拟了大型双湿式搅拌机螺旋轴焊接过程中产生的应力、应变、温度场分布及其变化规律,得到了螺旋轴轴端和犁刀部位的温度场、应力场和应变场的分布及其具体数值,根据分析结果绘制了螺旋轴焊接过程中各性能参数随时间变化的曲线.结果表明,残余应力明显小于材料的许用应力,焊接变形量在设计允许范围内,该结构设计合理,能够满足实际生产要求.研究方法和手段为焊接加工提供了理论基础.
- 螺旋轴 /
- 焊接技术 /
- 残余应力 /
- 塑性应变 /
- 有限元
Abstract: With three-dimensional modeling software and finite element analysis software,the stress/strain,temperature distribution and their variations generated in the screw shaft welding of the scale wet-type stirring mill are simulated,and the fields of the stress/strain,temperature are draw out. At the same time,the performance curve in welding process of screw shaft was draw out according to the analysis results. The analysis and experimental results indicate that the residual stress is obviously lower than permissible stress and the welding deformation is within designed permissible range,which is satisfied with reality producing request.
- screw shaft /
- welding technique /
- residual stress /
- plastic strain /
- finite element

1.	苏才津，秦南南，冯哲，张丽. 激光熔覆铁基合金涂层熔覆质量形貌预测. 四川冶金. 2025(01): 16-21 . 百度学术
2.	方琳. 镍基碳化钨合金粉末组织及性能. 世界有色金属. 2021(19): 3-5 . 百度学术
3.	尹燕，康平，路超，张圆，张瑞华. 激光焊接异种钢组织及显微硬度分析. 焊接学报. 2020(07): 71-77+100-101 . 本站查看
4.	张群莉，姚中志，周塘，姚建华，Volodymyr S.Kovalenko. 前驱体对激光熔覆复合溶胶凝胶制备陶瓷涂层的影响. 表面技术. 2019(02): 1-9 . 百度学术
5.	尹燕，潘存良，赵超，张瑞华，屈岳波. 激光熔覆高铬铁基合金的组织形成机制及对显微硬度的影响. 焊接学报. 2019(07): 114-120+166 . 本站查看
6.	尹燕，路超，刘鹏宇，肖梦智，蔡伟军，张瑞华，屈岳波. 激光熔敷制备高速钢涂层. 电焊机. 2017(10): 99-103 . 百度学术