稀土La改性Ag-Cu-Ti钎料的显微组织和力学性能

基金项目: 国家重点基础研究发展计划项目(2009CB724403);教育部新世纪优秀人才支持计划项目(NCET-07-0435)

Microstructure and mechanical property of Ag-Cu-Ti fillers added with rare earth lanthanum

Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China

摘要: 系统研究了钎焊CBN工具用稀土元素La改性Ag-Cu-Ti钎料合金的熔化温度、微观组织、显微硬度及钎料与45钢基体钎焊接头抗剪强度.结果表明,稀土元素La对Ag-Cu-Ti钎料合金的熔点影响很小,但是可以促进钎料的合金化,提高其合金化程度,稀土La加入量不超过0.5%(质量分数)时可以改善Ag-Cu-Ti钎料合金的微观组织,使金属间化合物分布更加均匀,提高Ag-Cu-Ti钎料合金的显微硬度,还可以明显改善钎料与45钢基体的钎焊接头抗剪强度.
- 稀土镧 /
- 银铜钛钎料 /
- 显微组织 /
- 力学性能
Abstract: The effect of lanthanum(La) on the microstructure,microhardness of Ag-Cu-Ti filler applied in brazed CBN tools and the shear strength of brazed joint between Ag-Cu-Ti filler and 0.45%C steel substrate were researched.The results indicated that the addition of La could accelerate the alloying of filler alloy,improve the microhardness of Ag-Cu-Ti filler alloy and shear strength of brazed joint between Ag-Cu-Ti filler and 0.45%C steel substrate.The content of La added in Ag-Cu-Ti alloy filler should be less than 0.5 wt%.
- rare earth La /
- Ag-Cu-Ti filler /
- microstructure /
- mechanical property