高级检索

船用低温高强钢三维多层焊接变形有限元模拟

陈章兰, 熊云峰, 李宗民

陈章兰, 熊云峰, 李宗民. 船用低温高强钢三维多层焊接变形有限元模拟[J]. 焊接学报, 2008, (8): 109-112.
引用本文: 陈章兰, 熊云峰, 李宗民. 船用低温高强钢三维多层焊接变形有限元模拟[J]. 焊接学报, 2008, (8): 109-112.
CHEN Zhanglan, XIONG Yunfeng, LI Zongmin. 3D finite element simulation on distortion distribution in multi layers welding of EH36[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (8): 109-112.
Citation: CHEN Zhanglan, XIONG Yunfeng, LI Zongmin. 3D finite element simulation on distortion distribution in multi layers welding of EH36[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (8): 109-112.

船用低温高强钢三维多层焊接变形有限元模拟

3D finite element simulation on distortion distribution in multi layers welding of EH36

  • 摘要: 低温高强钢EH36在船舶重要结构部位应用广泛。采用有限元软件,根据EH36钢热物理特性,对其焊接温度场和焊接变形进行了数值模拟。通过选择具备热和结构功能的耦合单元,应用APDL二次开发语言和生死单元技术,在三维方向上,对开坡口厚板的多层焊焊接热循环过程进行了分析,得到工件收缩变形及角变形等数据。结果表明,第一层焊接变形与第二层焊接变形大小和趋势存在差异,而后焊部位的焊接变形也不同于先焊部位。通过常见的V形坡口和U形坡口焊接变形大小的比较,在坡口截面尺寸相同的情况下,得到U形坡口焊接角变形明显小于V形坡口的结论。
    Abstract: As one of low temperature high strength steel, EH36 is widely used in key construction of ship.Based on the thermal-physical properties of EH36, 3D finite element simulation is carried out to analyse the temperature field and distortion distribution. To simulate the actual welding process, some technologies, such as APDL program used for development and birth &death skill, are applied in 3D multi passes welding.Thus the temperature field and weld distortion distribution in 3-directions are obtained.The result of simulation shows that there are many different distortions between the first pass and the second one, and that difference lies between the firstly welded part first and the later welded part.Further, the distortions of U-shape groove and V-shape groove were compared, the angle deformation of workpieces with V-shape groove is obviously greater than that of the U-shape groove at the same area of weld crass-section, both of them share with the same areas, same welding process and simulation process.
  • 期刊类型引用(10)

    1. 常青,杨程伟,罗彬杰,李细峰. 基于小波变换的扩散焊超声C图像融合算法. 郑州大学学报(工学版). 2023(04): 54-59+87 . 百度学术
    2. 王宪,罗彬杰,蒋音盈. 基于包络和极值约束的超声混叠信号稀疏分解. 上海第二工业大学学报. 2023(04): 351-358 . 百度学术
    3. 金士杰,杨雅喃,田鑫,史思琪,林莉. 微流控芯片流道特征超声C扫描分析. 应用声学. 2023(06): 1123-1128 . 百度学术
    4. 王海登,鄂楠,张智柏,刘向前. 扩散焊缺陷超声波检测信号特征. 焊接技术. 2021(02): 92-95+106 . 百度学术
    5. 周李洪,龚金科,李兵. 基于Gabor小波的汽车金属材料表面微小缺陷快速识别. 中南大学学报(自然科学版). 2021(04): 1099-1108 . 百度学术
    6. 董瑞琴,王婵,陈明,马啸啸,陈尧. 窄腹板扩散焊相控阵超声检测工艺探究. 无损探伤. 2021(05): 9-13 . 百度学术
    7. 张斌,于润桥,刘怡,胡博. 钛合金扩散焊微小缺陷弱磁检测试验研究. 中国测试. 2020(03): 6-11 . 百度学术
    8. 王斌,李升,朱富慧,李细锋. 基于超声无损检测的扩散连接界面缺陷尺寸评估. 焊接学报. 2020(08): 34-38+99 . 本站查看
    9. 李文涛,周正干. 一种复杂结构件圆柱面扩散焊缝阵列超声检测方法. 机械工程学报. 2020(22): 1-7 . 百度学术
    10. 迟大钊,齐聪成. 国内焊接缺陷声学无损检测研究综述. 精密成形工程. 2018(01): 74-81 . 百度学术

    其他类型引用(7)

计量
  • 文章访问数:  291
  • HTML全文浏览量:  15
  • PDF下载量:  85
  • 被引次数: 17
出版历程
  • 收稿日期:  2007-06-17

目录

    /

    返回文章
    返回