高级检索
郭海云, 李桓, 刘琼, 王炯祥, 刘信诠, 赵伟珍, 傅育文. 脉冲参数对脉冲埋弧焊过程动态仿真波形的影响[J]. 焊接学报, 2005, (9): 61-64.
引用本文: 郭海云, 李桓, 刘琼, 王炯祥, 刘信诠, 赵伟珍, 傅育文. 脉冲参数对脉冲埋弧焊过程动态仿真波形的影响[J]. 焊接学报, 2005, (9): 61-64.
GUO Hai-yun, LI Huan, LIU Qiong, WANG Jiong-xiang, LIU Xin-quan, ZHAO Wei-zhen, FU Yu-wen. Effect of pulsed parameters on dynamic simulating waveform of pulsed submergedarc welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (9): 61-64.
Citation: GUO Hai-yun, LI Huan, LIU Qiong, WANG Jiong-xiang, LIU Xin-quan, ZHAO Wei-zhen, FU Yu-wen. Effect of pulsed parameters on dynamic simulating waveform of pulsed submergedarc welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (9): 61-64.

脉冲参数对脉冲埋弧焊过程动态仿真波形的影响

Effect of pulsed parameters on dynamic simulating waveform of pulsed submergedarc welding process

  • 摘要: 针对变速送丝调节系统脉冲埋弧焊可调参数众多的问题,在所建仿真模型的基础上对其脉冲参数的选择进行了研究。分别讨论了脉冲频率、脉宽比、峰值电流和基值电流对仿真波形的影响,为实际生产试验中最优化参数的选择提供了快捷、直观的方法,为脉冲埋弧焊的推广应用奠定了基础。

     

    Abstract: Since there are many adjustable parameters in alternative speed wire-feeding pulsed submerged-arc welding process,selection of pulsed parameters on the basis of the simulating model was investigated in this paper.The impact of pulsed frequency,duty factor,peak current and base current were discussed,providing a convenient and intuitionistic means for the selection of optimum parameters in practical experiments and foundation for the application of the pulsed submerged-arc welding method.

     

/

返回文章
返回