高级检索

16Mn钢混合气体保护焊时焊缝金属中气体含量变化的规律

Variational rule of gas content in 16Mn weld metal with mixed gas arc welding

  • 摘要: 用SQM-1型脉冲加热气相色谱仪联合测定了以φ1.6 mmH08Mn2Si焊丝在混合气体保护下焊接16Mn钢时焊缝金属中的氧、氮及残余氢的含量。试验结果表明,随保护气中CO2含量的提高,焊缝金属中的氧、氮及残余氢含量增加,但增加幅度随CO2含量的提高而减小;随焊接电流的增大,焊缝金属中的氧、氮及残余氢含量下降,但下降幅度随电流的增大而减小;同时,经过回归分析,得出了该焊接条件下焊缝金属中氧、氮及残余氢与混合保护气体CO2含量和焊接电流关系的数学模型,用该数学模型计算的结果与试验数据有良好的一致性。

     

    Abstract: Oxygen content 0, nitrogen content N and residual hydrogen content Hr in weld metal were meassured using SQM-PWSE heating gas chromatography welded by φ1.6 mm H08Mn2Si welding wire with mixed gas arc welding. With the increasing of CO2 content in protective atmosphere, O, N and Hr increase. With the increasing of welding current, O, N and Hr decrease. The mathematical relationship between O, N, Hr, and CO2 content in protective atmosphere and welding current is established based on the tropical analysis.The value of O,N and Hr calculated by this model is well consistent with experimental results. This model can be used to qnantitatively calculate O, N and Hr on the given condition.

     

/

返回文章
返回