新型逆变CO<sub>2</sub>焊机的控制原理与特点

新型逆变CO₂焊机的控制原理与特点

基金项目: 北京市科委立项支持合同编号:959401500

1.
College of Mechanical Engineering & Applied Eleetronics Technology, Beijing University of Technology, Beijing 100022, China
2.
Time Group Inc, Beijing 100038, China

摘要: 依据CO₂焊接工艺的特点,设计了一种电子电抗器控制的逆变弧焊电源。当短路发生后,电流先保持在一较低值,然后以斜率可以调节的双折线规律上升。在燃弧阶段,调节控制回路参数,控制燃弧电流的变化速度,保证充足的燃弧能量。设计了专门的引弧和收弧电路。试验表明,该焊机具有飞溅小,成形好,去球效果好,容易引弧等优点。
- 电子电抗器 /
- 短路过渡 /
- CO₂气体保护电弧焊
Abstract: Developed a new kind of electronic inductor controlled inverter arc welding power source.At the beginning of the short circuit,the output current could be kept at a low level,then it will rise at a high speed at first and a lower speed a short time later,in which the rising speed of short circuit current could be adjusted.During the arc period,changing rate of arc current could be adjusted by modulating the parameter of the control circuit,which ensures the output power of the arc is big enough.Some special circuits are used to improve the welding process at the arc beginning and the ending.It is proved that the low spatter,good weld bead,easy ignition,no ball on the top of wire is the characteristic of this kind of inverter power source.
- electronic inductor /
- short circuit transfer /
- CO₂ arc welding

1.	白鼎甲，白秀琴，郭智威. 大型邮轮冷却水系统管道焊缝腐蚀行为研究. 船舶工程. 2023(09): 6-12+25 . 百度学术
2.	蒋小霞，纪华，徐楠，张树玲，寇琳媛. 激光焊接Ⅰ型钢质三明治板的研究进展. 热加工工艺. 2019(09): 5-8+12 . 百度学术
3.	黄磊，陈希章，马宏波，林涛. DP780镀锌钢激光焊接性能与工艺. 焊接学报. 2018(08): 55-58+131 . 本站查看
4.	刘政军，武丹，苏允海. B元素对药芯焊丝焊缝金属针状铁素体形成的影响. 焊接学报. 2018(12): 19-24+130 . 本站查看
5.	楼晓丹，李相波，程旭东，黄国胜，邢路阔. 10CrNi3MoV高强度结构钢焊接接头海水腐蚀行为研究. 热加工工艺. 2017(13): 99-104 . 百度学术
6.	张飒，王攀，庄园. Weldox700E高强度钢焊接性探讨. 中国机械工程. 2016(13): 1815-1819 . 百度学术