超纯铁素体Cr30Mo2钢焊接接头的组织和力学性能
Microstructure and Mechanical Properties in Welded Joint of High Purity Cr30Mo2 Ferritic Stainless Steel
-
摘要: 利用自制的焊接工作台,在TIG焊基础上,对新型Cr30Mo2超纯铁素体不锈钢施焊。焊接过程中对焊缝和热影响区附加拖罩和背衬的Ar气延续保护。对焊接接头质量进行宏观和X射线探伤检验;借助金相显微镜、扫描电镜(SEM)、透射电镜(TEM)分析焊缝组织特征和冲击断口形貌;按国家标准测试焊接接头的力学性能。研究结果表明,在焊接接头上未发现任何焊接缺陷,焊缝质量良好;其强度、延性和韧性均达到母材水平,特别是在焊缝和热影响区未出现脆化现象,冲击韧性值较高。冲击断口形貌特征为韧窝断口形貌。Abstract: A welding bench was designed.By using it a new type of high-purity ferritic stainless steel was welded based on TIG.The welded joints of Cr30Mo2 ferritic stainless steel were formed by the argon arc welding with stretching argon shielding behind nozzle.The qualities of welded joints were carried on by visual examination and X-radiographic inspection.Microstructure of welded joint was investigated by means of metalloscope.Impact fracture morphologies were analyzed by making use of scanning electron microscope(SEM) and transmission electron microscope(TEM).The joint mechanical properties were measured according to national standard.The results showed that any weld defects were not found in welded joint.Mechanical properties of welded joint were in good agreement with the base metal,especially,the plastic and impact toughness properties on the weld metal and heat affected zone(HAZ) were not decreased.Toughness fracture micromorphology characters were found in heat-affected zone of welded joint.
-
-
期刊类型引用(13)
1. 董会，甘少明，杜永祺，白佳鑫，程煜辰，李明，朱朝璇. 激光扫描速率对NiCr/Cr_3C_2涂层微结构与耐磨性的影响. 金属热处理. 2023(11): 282-287 . 
百度学术
2. 皮智敏，周鸿凯，黄志武，陈枭. WC-Cr_3C_2基金属陶瓷涂层的研究现状. 热加工工艺. 2021(02): 6-9 . 百度学术
3. 胡登文，刘艳，陈辉，王梦超. Q960E钢激光熔覆Ni基WC涂层组织及性能. 中国激光. 2021(06): 239-245 . 百度学术
4. 陆琪琪，叶林，陆海峰，张学峰，阮新宇，覃恩伟，吴树辉. 适用于垃圾焚烧炉的激光熔覆技术研究. 热处理. 2021(02): 31-35+39 . 百度学术
5. 张敏，王刚，张立胜，许桓瑞，张云龙，许帅. 40Cr钢表面激光熔覆Fe, Ni基涂层组织性能研究. 稀有金属. 2021(08): 928-935 . 百度学术
6. 王冬春，杜锦涛，刘辉，栾程群. 碳化钨耐磨材料激光熔覆关键问题. 电焊机. 2021(08): 146-152+182 . 百度学术
7. 杨宁，李立凯. 激光功率和粉末含量对(V_2O_5+B_2O_3+C)镍基涂层硬度的影响. 热加工工艺. 2021(24): 103-105 . 百度学术
8. 钱绍祥. 激光熔覆铁基合金涂层的组织及耐蚀性能. 铸造技术. 2019(06): 613-616 . 百度学术
9. 杨宁，李立凯. 激光熔覆(V_2O_5+WO_3+C)/Ni60涂层的磨损性能研究. 稀有金属与硬质合金. 2019(04): 54-57+64 . 百度学术
10. 杨宁，李立凯. 激光功率和粉末含量对(B_2O_3+WO_3+C)镍基熔覆层硬度的影响. 应用激光. 2019(04): 574-579 . 百度学术
11. 李美艳，韩彬，林学强. 基于“学研创”交叉融合的激光加工实验室建设与安全管理实践. 实验技术与管理. 2018(12): 242-245 . 百度学术
12. 马群双，李亚江，王娟，段虎明，徐广源. 宽束激光熔覆Ni60/WC复合层显微组织及抗剪强度. 焊接学报. 2016(12): 49-52+131 . 本站查看
13. 李正秋，石玗，曹驰，苏艳文. 半导体激光熔覆Ni基合金堆焊层组织及性能的研究. 应用激光. 2016(05): 547-552 . 百度学术
其他类型引用(12)
计量
- 文章访问数: 285
- HTML全文浏览量: 10
- PDF下载量: 114
- 被引次数: 25
下载:
