高级检索

气体流量对射频等离子体球化GH4169合金粉末的影响

尹燕, 赵超, 潘存良, 路超, 张瑞华

尹燕, 赵超, 潘存良, 路超, 张瑞华. 气体流量对射频等离子体球化GH4169合金粉末的影响[J]. 焊接学报, 2019, 40(11): 100-105. DOI: 10.12073/j.hjxb.2019400295
引用本文: 尹燕, 赵超, 潘存良, 路超, 张瑞华. 气体流量对射频等离子体球化GH4169合金粉末的影响[J]. 焊接学报, 2019, 40(11): 100-105. DOI: 10.12073/j.hjxb.2019400295
shu
YIN Yan, ZHAO Chao, PAN Cunliang, LU Chao, ZHANG Ruihua. Effect of gas flow rate on the characteristics of RF plasma spheroidized GH4169 alloy powder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 100-105. DOI: 10.12073/j.hjxb.2019400295
Citation: YIN Yan, ZHAO Chao, PAN Cunliang, LU Chao, ZHANG Ruihua. Effect of gas flow rate on the characteristics of RF plasma spheroidized GH4169 alloy powder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 100-105. DOI: 10.12073/j.hjxb.2019400295
shu

气体流量对射频等离子体球化GH4169合金粉末的影响

  • 1.

    兰州理工大学 省部共建有色金属先进加工与再利用国家重点实验室, 兰州 730050

  • 2.

    中国钢研科技集团有限公司, 北京 100081

  • 3.

    中国钢研科技集团有限公司, 北京 100081;阳江市五金刀剪产业技术研究院, 阳江 529533

基金项目: 广东省“扬帆计划”引进创新创业团队专项资助（2015YT02G090）；阳江市高功率激光应用实验室有限公司新型研发机构初创期建设补助（809099997119）；阳江市五金刀剪产业技术研究院新型研发机构初创期建设补助（809099997119）

Effect of gas flow rate on the characteristics of RF plasma spheroidized GH4169 alloy powder

  • 1.

    State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China

  • 2.

    China Iron & Steel Research Institute Group, Beijing 100081, China

  • 3.

    China Iron & Steel Research Institute Group, Beijing 100081, China;Hardware Knife Cut Industrial Technology Research Institute Yangjiang, Yangjiang 529533, China

摘要

    摘要
  • 摘要: 采用射频等离子体球化技术对多次激光3D打印废弃的不规则GH4169合金粉末进行二次改造，研究载气、氢气流量对球化粉末效果的影响机理.利用扫描电镜、霍尔流动仪、振实密度测试仪及激光粒度分析仪对球化前后粉末的形貌、流动性、松装比及粒度分布进行分析.结果表明，载气流量越大，粉末在等离子体火焰中停留时间越短、运动絮乱，球化率越低；氢气流量越大，单位时间内等离子体与粉末热交换越大，球化生产效率越高.经球化处理的GH4169合金粉末的流动性、松装比得到了显著的改善，粉末颗粒平均粒径增加，粒径分布变窄.
    Abstract: The secondary modification of irregular GH4169 alloy powder discarded from multiple laser 3D printing by RF plasma technology. The influence mechanism of carrier gas and hydrogen flow on the effect of spheroidized powder was studied. Scanning electron microscopy, Hall flow meter, tap density tester, and laser particle size analyzer were used to analyze the morphology, fluidity, looseness ratio and particle size distribution of the powder before and after spheroidization. The results show that the larger the carrier gas flow rate, the shorter the residence time of the powder in the plasma flame, the chaotic motion, and the lower the spheroidization rate.The larger the hydrogen flow rate, the greater the heat exchange between plasma and powder per unit time, and the higher the spheroidization production efficiency. The fluidity and looseness ratio of the spheroidized GH4169 alloy powder is significantly improved, the average particle size of the powder particles increases, and the particle size distribution becomes narrow.
    • HTML全文
    • 参考文献(13)
  • [1] 余果, 尹玉环, 高嘉爽, 等. 基于正交试验-BP神经网络的GH4169膜片微束TIG焊接工艺优化[J]. 焊接学报, 2018, 39(11):119-123, 128 Yu Guo, Yin Yuhuan, Gao Jiashuang, et al. Orthogonal experiment method and BP neural networks in optimization of microbeam TIG welded GH4169[J]. Transactions of the China Welding Institution, 2018, 39(11):119-123, 128
    [2] Liu Fencheng, Lin Xin, Zhao Weiwei, et al. Effects of solution treatment temperature on microstructures and properties of laser solid forming GH4169 superalloy[J]. Rare Metal Materials and Engineering, 2010, 39(9):1519-1524.
    [3] 路超. GH4169金属粉末选区激光熔化成型工艺及性能研究[D]. 兰州:兰州理工大学, 2017.
    [4] Macro Breiling, Stefan H, Muller-Weinfurtner S H, et al. SLM peak-power reduction without explicit side information[J]. IEEE Communications Letters, 2001, 5(6):239-241.
    [5] 姚妮娜, 彭雄厚. 3D打印金属粉末的制备方法[J]. 四川有色金属, 2013(4):48-51 Yao Nina, Peng Xionghou. The preparation method of metal powder for 3D printing[J]. Sichuan Nonferrous Metals, 2013(4):48-51
    [6] 乐国敏, 李强, 董鲜峰, 等. 适用于金属增材制造的球形粉体制备技术[J]. 稀有金属材料与工程, 2017, 46(4):1162-1168 Le Guomin, Li Qiang, Dong Xianfeng, et al. Fabrication techniques of spherical-shaped metal powders suitable for additive manufacturing[J]. Rare Metal Materials and Engineering, 2017, 46(4):1162-1168
    [7] Chen G, Zhao S Y, Tan P, et al. Shape memory TiNi powders produced by plasma rotating electrode process for additive manufacturing[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(12):2647-2655.
    [8] 王华明. 高性能大型金属构件激光增材制造:若干材料基础问题[J]. 航空学报, 2014, 35(10):2690-2698 Wang Huaming. Materials foundation issues of laser additive manufacturing for high-performance large metal components[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(10):2690-2698
    [9] Xu J L, Khor K A, Dong Z L, et al. Preparation and characterization of nano-sized hydroxyapatite powders produced in a radio frequency (rf) thermal plasma[J]. Materials Science & Engineering A, 2004, 374:101-108.
    [10] Roy M, Bandyopadhyay A, Bose S. Bulk processing of hydroxyapatite nanopowder using radio frequency induction plasma[J]. Journal of the American Ceramic Society, 2010, 93(11):3720-3725.
    [11] 陈熙. 高温电离气体的传热与流动[M]. 北京:科学出版社, 2009.
    [12] Boulos M I, Fauchais P L, Pfender E. Transport properties of non-equilibrium plasmas[M]. Handbook of Thermal Plasmas, 2015.
    [13] Colombo V, Ghedini E, Mentrelli A, et al. Three dimensional modeling of thermal plasmas (RF and Transferred Arc) for the design of sources and industrial processes[C]//Advanced Plasma Technology. Wiley-VCH Verlag GmbH & Co. KGaA, 2008, 75-97.
    • 相关文章
    • 施引文献(24)

  • 期刊类型引用(12)

    1. 武永利，杨志斌，车彦龙，康金文，孙亚鹏. 超声冲击功率对S355J2G4钢接头组织与性能的影响. 焊接技术. 2024(08): 14-17+145 . 百度学术
    2. 何亮，贺智涛，张蕾，程彬，马晓阳，丁鹏龙. 焊趾熔修和超声冲击处理对船用钢焊接接头的影响. 电焊机. 2024(08): 96-101 . 百度学术
    3. 马景平，曹睿，周鑫. 高强钢焊接接头疲劳寿命的提高方法进展. 焊接学报. 2024(10): 115-128 . 本站查看
    4. 李涛，汪洋，甘进，邵永波. 超声冲击处理焊接节点疲劳性能改善及寿命预测方法研究进展. 建筑钢结构进展. 2023(06): 58-67 . 百度学术
    5. 汪子钊，张俊，孙高辉，全顺红，刘华兵，甘进，吴卫国，汪舟. 超声冲击对厚板异种钢T型焊接接头组织与硬度的影响. 机械工程材料. 2023(11): 6-11 . 百度学术
    6. 周南阳，何亮，程彬，杜义. 超声冲击处理改善焊接接头力学特性研究进展. 材料开发与应用. 2023(05): 94-98 . 百度学术
    7. 王任甫，何亮，孙磊. 船体局部密集焊缝结构疲劳性能研究. 材料开发与应用. 2023(05): 31-36 . 百度学术
    8. 那飞，龙琼，伍剑明，苏向东. 表面强化技术在焊接领域中的应用研究进展. 贵州农机化. 2022(01): 21-24 . 百度学术
    9. 李美艳，薛喜欣，张琪，宋立新，韩彬，刘明磊. 超声冲击强化焊接接头及金属表面强化研究进展. 表面技术. 2022(06): 89-99 . 百度学术
    10. 王振飞，杨新俊. 超声冲击处理S30408不锈钢的微观组织演变与电化学性能. 金属热处理. 2022(07): 221-226 . 百度学术
    11. 王磊，黄秉汉，丛家慧，回丽，周松，徐永臻. 超声冲击对搅拌摩擦焊缝疲劳性能的影响. 吉林大学学报(工学版). 2022(11): 2542-2548 . 百度学术
    12. 邓彩艳，刘庚，龚宝明，刘永. 基于Tanaka-Mura位错模型的疲劳裂纹萌生寿命预测. 焊接学报. 2021(01): 30-37+99 . 本站查看

    其他类型引用(12)

    • 资源附件(0)
计量
  • 文章访问数:  385
  • HTML全文浏览量:  8
  • PDF下载量:  10
  • 被引次数: 24
出版历程
  • 收稿日期:  2019-04-10

目录

摘要
HTML全文
    参考文献(13)
    相关文章
    施引文献(24)
    资源附件(0)

    /

    返回文章
    返回

    网站版权 © 焊接杂志社焊接学报编辑部电话：0451-86323218地址：哈尔滨市松北区创新路2077号

    本系统由 北京仁和汇智信息技术有限公司 开发  百度统计