高级检索

铝锂合金焊接技术的研究现状分析

陈国庆, 尹乾兴, 司晓庆, 张秉刚

陈国庆, 尹乾兴, 司晓庆, 张秉刚. 铝锂合金焊接技术的研究现状分析[J]. 焊接学报, 2019, 40(8): 155-160. DOI: 10.12073/j.hjxb.2019400225
引用本文: 陈国庆, 尹乾兴, 司晓庆, 张秉刚. 铝锂合金焊接技术的研究现状分析[J]. 焊接学报, 2019, 40(8): 155-160. DOI: 10.12073/j.hjxb.2019400225
shu
CHEN Guoqing, YIN Qianxing, SI Xiaoqing, ZHANG Binggang. Research status analysis of aluminum-lithium alloy welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(8): 155-160. DOI: 10.12073/j.hjxb.2019400225
Citation: CHEN Guoqing, YIN Qianxing, SI Xiaoqing, ZHANG Binggang. Research status analysis of aluminum-lithium alloy welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(8): 155-160. DOI: 10.12073/j.hjxb.2019400225
shu

铝锂合金焊接技术的研究现状分析

  • 哈尔滨工业大学 先进焊接与连接国家重点实验室, 哈尔滨 150001

基金项目: 国家自然科学基金资助项目（51774106）

Research status analysis of aluminum-lithium alloy welding

  • State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China

摘要

    摘要
  • 摘要: 铝锂合金作为轻质金属材料，具有优良的综合性能，因此应用前景十分广阔.从铝锂合金的焊接性出发，分别对铝锂合金弧焊，高能束焊，搅拌摩擦焊，扩散焊以及钎焊的研究现状进行了讨论.结果表明，采用各种焊接技术均可实现铝锂合金的焊接.分析了采用各种焊接技术焊接铝锂合金时的优势以及不足，并对各种焊接技术所获得接头的性能以及工艺改进措施进行了研究.针对目前各种焊接技术急需解决的问题以及铝锂合金焊接的发展方向，总结出了今后铝锂合金焊接研究的重点内容，并对铝锂合金焊接前景进行了分析与展望.
    Abstract: As a light metal, aluminum-lithium alloy possesses excellent comprehensive properties. For this reason, its application prospect is very broad. Based on the weldability of aluminum-lithium alloys, research status of arc welding, high-energy beam welding, friction stir welding, diffusion welding and brazing of aluminum-lithium alloy were discussed. The results shown that aluminum-lithium alloys can be welded by various welding techniques. The advantages and disadvantages of various welding techniques for welding aluminum-lithium alloys were analyzed. The properties of joints obtained by them and process improvement measures were studied respectively. In view of the problems to be solved in welding techniques and the development direction of aluminum-lithium alloy welding, the key contents of future research on aluminum-lithium alloy welding are summarized, and the prospects were analyzed and forecasted.
    • HTML全文
    • 参考文献(30)
  • [1] Bonaccorsi L, Costanza G, Missori S, et al. Mechanical and metallurgical characterization of 8090 Al-Li alloy welded joints[J]. Metallurgist, 2012, 56(1-2):75-84.
    [2] Calogero V, Costanza G, Missori S, et al. A weldability study of Al-Cu-Li 2198 alloy[J]. Metallurgist, 2014, 57(11-12):1134-1141.
    [3] 郭晓娟,李光,董春林,等. 1420铝锂合金搅拌摩擦焊接力学性能[J].焊接学报, 2009, 30(4):45-48 Guo Xiaojuan, Li Guang, Dong Chunlin, et al. Mechanical properties of 1420 aluminum-lithium alloy friction stir welding[J]. Transactions of the China Welding Institution, 2009, 30(4):45-48
    [4] Reddy G M, Gokhale A A, Rao K P. Effect of filler metal composition on weldability of Al-Li alloy 1441[J]. Science&Technology of Welding&Joining, 2014, 3(3):151-158.
    [5] 施军,胡明华,朱迅强,等. 2195铝锂合金VPTIG焊接头组织性能[J].电焊机, 2014, 44(4):146-148 Shi Jun, Hu Minghua, Zhu Xunqiang, et al. Study on microstructure and mechanical properties of VPTIG welded joint of 2195 Al-Li alloy[J]. Electric Welding Machine, 2014, 44(4):146-148
    [6] 李小飞,李晓红,熊华平,等.铝锂合金自动钨极氩弧焊接工艺研究[J].材料工程, 2008(3):13-17 Li Xiaofei, Li Xiaohong, Xiong Huaping, et al. Process investigation on automatic tungsten inert gas welding of aluminium-lithium alloy[J]. Journal of Materials Engineering, 2008(3):13-17
    [7] Sun Q, Lin S, Yang C, et al. Arc characteristic of ultrasonic assisted TIG welding[J]. China Welding, 2008, 17(4):52-57.
    [8] 张玉岐,杨春利,林三宝,等. 2195铝锂合金超声TIG焊的组织与性能分析[J].焊接学报, 2015, 36(10):53-56 Zhang Yuqi, Yang Chunli, Lin Sanbao, et al. Microstructure and mechanical properties of ultrasonic assisted TIG welding of 2195 Al-Li alloy[J]. Transactions of the China Welding Institution, 2015, 36(10):53-56
    [9] Feng J, Zhang H, He P. The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding[J]. Materials&Design, 2009, 30(5):1850-1852.
    [10] Zhang H, Feng J, He P, et al. The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel[J]. Materials Science and Engineering:A, 2009, 499(1-2):111-113.
    [11] 汪殿龙,刘淑琦,陈彦朝,等.交流CMT焊接工艺对2198铝锂合金接头组织及性能的影响[J].电焊机, 2016, 46(2):43-47 Wang Dianlong, Liu Shuqi, Chen Yanchao, et al. Effect of welding parameters on microstructure and mechanical properties of AC CMT welded 2198 aluminum-lithium alloy[J]. Electric Welding Machine, 2016, 46(2):43-47
    [12] 汪殿龙,张志洋,梁志敏.铝锂合金1420交流CMT焊接工艺及接头性能研究[J].热加工工艺, 2014, 43(9):162-164 Wang Dianlong, Zhang Zhiyang, Liang Zhimin. Research on AC CMT welding process of 1420 Al-Li alloy and properties of welded joints[J]. Hot Working Technology, 2014, 43(9):162-164
    [13] Cui L, Li X, He D, et al. Effect of Nd:YAG laser welding on microstructure and hardness of an Al-Li based alloy[J]. Materials Characterization, 2012, 71(5):95-102.
    [14] 许飞,陈俐,巩水利,等.焊接电流对铝锂合金激光-MIG复合焊焊缝成形的影响[J].热加工工艺, 2009, 38(7):103-105 Xu Fei, Chen Li, Gong Shuili, et al. Effects of welding current on laser-MIG hybrid welding of aluminum-lithium alloy[J]. Hot Working Technology, 2009, 38(7):103-105
    [15] 安娜,张心怡,杨武雄,等. 2060铝锂合金电流辅助激光填丝焊接工艺分析[J].焊接学报, 2017, 38(3):83-86 An Na, Zhang Xinyi, Yang Wuxiong, et al. Electrical current assisted laser welding of 2060 aluminum-lithium alloy with filler wire[J]. Transactions of the China Welding Institution, 2017, 38(3):83-86
    [16] Yan J, Gao M, Li G, et al. Microstructure and mechanical properties of laser-MIG hybrid welding of 1420 Al-Li alloy[J]. International Journal of Advanced Manufacturing Technology, 2013, 66(9-12):1467-1473.
    [17] 许飞,陈俐,巩水利,等.铝锂合金激光填丝焊接接头组织性能研究[J].稀有金属材料与工程, 2011, 40(10):1775-1779 Xu Fei, Chen Li, Gong Shuili, et al. Microstructure and mechanical properties of Al-Li alloy by laser welding with filler wire[J]. Rare Metal Materials and Engineering, 2011, 40(10):1775-1779
    [18] 黄燕,王少刚,韩小敏,等.铝锂合金电子束焊接头的微观组织与力学性能[J].热加工工艺, 2016, 45(5):40-43 Huang Yan, Wang Shaogang, Han Xiaomin, et al. Microstructure and mechanical properties of Al-Li alloy electron beam welded joint[J]. Hot Working Technology, 2016, 45(5):40-43
    [19] 俞旷,王少刚,陈忱.铝锂合金的真空电子束焊接工艺及其接头组织与性能[J].电焊机, 2011, 41(2):70-75 Yu Kuang, Wang Shaogang, Chen Chen. Electron beam welding technology and microstructure and mechanical properties of welded joints for 2090 Al-Li alloy[J]. Electric Welding Machine, 2011, 41(2):70-75
    [20] Wang S G, Yu K, Luo C X, et al. Microstructure of Al-Li alloy electron beam welding joint after post-weld heat treatment[J]. Applied Mechanics&Materials, 2012, 217:1921-1927.
    [21] 王少刚,俞旷,陈忱,等.焊后热处理对铝锂合金电子束焊接头组织与性能的影响[J].稀有金属材料与工程, 2013, 42(3):579-584 Wang Shaogang, Yu Kuang, Chen Chen, et al. Influence of post-weld heat treatment on microstructure and mechanical properties of Al-Li alloy electron beam welding joint[J]. Rare Metal Materials and Engineering, 2013, 42(3):579-584
    [22] 陈永来,李劲风,张绪虎,等. 2195铝锂合金摩擦搅拌焊接头组织[J].中国有色金属学报, 2016, 26(5):964-972 Chen Yonglai, Li Jinfeng, Zhang Xuhu, et al. Structure of friction-stir welding joint of 2195 Al-Li alloy[J]. The Chinese Journal of Nonferrous Metals, 2016, 26(5):964-972
    [23] Cai B, Zheng Z Q, He D Q, et al. Friction stir weld of 2060 Al-Cu-Li alloy:microstructure and mechanical properties[J]. Journal of Alloys&Compounds, 2015, 649:19-27.
    [24] Sidhar H, Martinez N Y, Mishra R S, et al. Friction stir welding of Al-Mg-Li 1424 alloy[J]. Materials&Design, 2016, 106:146-152.
    [25] 牛涛,侯红亮,王耀奇,等.镓中间层1420铝锂合金扩散连接界面组织与性能[J].塑性工程学报, 2014, 21(6):112-116 Niu Tao, Hou Hongliang, Wang Yaoqi, et al. Interfacial microstructure and mechanical property of diffusion bonding joint of 1420 Al-Li alloy by using gallium as interlayer[J]. Journal of Plasticity Engineering, 2014, 21(6):112-116
    [26] 陈文华,秦展琰,沈以赴. 1420铝锂合金扩散焊工艺及中间层材料对接头性能的影响[J].焊接学报, 2005, 26(10):101-104 Chen Wenhua, Qin Zhanyan, Shen Yifu. Effect of process parameters and interlayer on properties of 1420 Al-Li alloy diffusion bonded joint[J]. Transactions of the China Welding Institution, 2005, 26(10):101-104
    [27] Dunford D V, Partridge P G. Strength and fracture behaviour of diffusion bonded joints in Al-Li (8090) alloy. Ⅲ-Peel strength[J]. Journal of Materials Science, 1991, 26(10):2625-2629.
    [28] 孙德超.铝锂合金的钎焊性研究[J].南昌航空工业学院学报, 1999, 13(3):21-24 Sun Dechao. Investigation on the brazeability of aluminium-lithium alloys[J]. Journal of Nanchang Institute of Aeronautical Technology, 1999, 13(3):21-24
    [29] 张玲,薛松柏,韩宗杰,等.高强铝锂合金炉中钎焊及接头组织分析[J].焊接学报, 2006, 27(8):71-74 Zhang Ling, Xue Songbai, Han Zongjie, et al. Analysis on high strength Al-Li alloy joints brazed in furnace[J]. Transactions of the China Welding Institution, 2006, 27(8):71-74
    [30] 王忠平,贺勇,贺运佳.铝锂合金钎焊反应钎剂的研究[J].航空制造技术, 1997(4):18-20 Wang Zhongping, He Yong, He Yunjia. Study on the reaction flux for Al-Li alloy brazing[J]. Aeronautical Manufacturing Technology, 1997(4):18-20
    • 相关文章
    • 施引文献(13)

  • 期刊类型引用(8)

    1. 周桂娟，童志，陈晓华，郑文跃，熊道英，王艳林. X80管线钢焊接与焊缝开裂影响因素研究进展. 材料导报. 2022(02): 168-176 . 百度学术
    2. 朱敏，张延松. X80埋弧焊热影响区的微观组织与局部软化行为分析. 焊接学报. 2021(04): 69-73+96+100 . 本站查看
    3. 张岩. 高强钢在轻量化结构设计中的应用及其焊接. 电焊机. 2021(12): 34-40+128 . 百度学术
    4. 李赫，王磊，黄勇，周明，周琦，王克鸿. 预热温度对AH36激光焊缝组织及硬度的影响. 焊接. 2021(10): 25-28+62 . 百度学术
    5. 卓晓，李立新，李弟，刘译洋，孔海君，赵丹. EH36-Z35钢在低温环境中的焊接冷裂纹敏感性. 机械工程材料. 2020(08): 47-51 . 百度学术
    6. 卢尚文，董常福，龚艳丽，何忆斌，张凯. 960 MPa级高强钢焊接热影响区连续冷却曲线的测定及焊接工艺评定. 焊接. 2019(07): 50-56+68 . 百度学术
    7. 马俊，朱敏，袁永锋，郭绍义，尹思敏，张强. 交流干扰下不同组织X100钢在格尔木土壤模拟溶液中的腐蚀行为. 表面技术. 2019(08): 272-279 . 百度学术
    8. 严春妍，元媛，张可召，吴立超，王宝森. X100管线钢焊接冷裂纹敏感性. 焊接学报. 2019(12): 41-46+162-163 . 本站查看

    其他类型引用(5)

    • 资源附件(0)
计量
  • 文章访问数:  563
  • HTML全文浏览量:  24
  • PDF下载量:  82
  • 被引次数: 13
出版历程
  • 收稿日期:  2018-07-29

目录

摘要
HTML全文
    参考文献(30)
    相关文章
    施引文献(13)
    资源附件(0)

    /

    返回文章
    返回

    网站版权 © 焊接杂志社焊接学报编辑部电话：0451-86323218地址：哈尔滨市松北区创新路2077号

    本系统由 北京仁和汇智信息技术有限公司 开发  百度统计