基于激光位移传感器的大梁自动焊偏差识别
Identification of weld deviation in longeron automatic welding based on laser displacement sensor
-
摘要: 针对大梁自动焊过程中焊缝坡口角度、工件偏转、坡口间隙、定位焊缝等因素，容易造成焊缝偏差识别结果不准确或难以识别的现状，提出了一种基于激光位移传感器的大梁自动焊偏差识别方法，建立了大梁焊缝坡口弧长模型，在特征谐波检测法基础上，利用各谐波分量之间线性空间关系，提出了大梁焊缝偏差解算方法，消除了坡口角度和工件偏转等非偏差因素对偏差检测的干扰.对某集装箱大梁纵缝进行焊缝偏差识别试验.结果表明，该方法对坡口间隙和定位焊缝具有良好的抗干扰能力，为大梁自动焊偏差识别提供一种新的理论和实践参考.Abstract: The groove angle, workpiece deflection, root gap and tack weld of the longeron, which easily cause the inaccurate or difficult identification of the weld deviation. In order to solve this problem, a deviation identificaion method in longeron automatic welding was proposed, based on laser displacement sensor. By establishing a arc length model, and making use of the linear relationship between the different harmonic components of arc length, a weld deviation solution method was presented, which could eliminate the effect of groove angle and workpiece deflection on weld deviation identification. A container longeron was taken for experimental research to identify weld deviation, it has been shown that the method proposed in this paper has good anti-interference capability to root gap and tack weld, which provides a new theoretical and practical reference for deviation identificaion in longeron automatic welding.
-
-
[1] 王先锋, 蒋忠城, 段华东, 等. 电阻点焊中电极位移三段距离测量方法及试验验证[J]. 焊接学报, 2016, 37(8):63-66. Wang Xianfeng, Jiang Zhongcheng, Duan Huadong, et al. Three distance method and its experimental verification for electrode displacement measurement in resistance spot welding[J]. Transactions of the China Welding Institution, 2016, 37(8):63-66. [2] 单忠德, 张飞, 聂军刚, 等. 非接触式缸盖平面度误差检测方法与测量系统研究[J]. 机械工程学报, 2016, 52(20):1-7. Shan Zhongde, Zhang Fei, Nie Jungang, et al. Study on the detection method and measurement system of head flatness error on non-contact detection[J]. Journal of Mechanical Engineering, 2016, 52(20):1-7. [3] Lü Xueqin, Zhang Ke, Wu Yixiong. The seam position detection and tracking for the mobile welding robot[J]. The International Journal of Advanced Manufacturing Technology, 2017, 88(5-8):2201-2210.[DOI: 10.1007/s00170-016-8922-8] [4] 卢亮, 孟正大. 基于测距传感器的焊缝位置检测方法与实现[J]. 工业控制计算机, 2014, 27(10):32-35. Lu Liang, Meng Zhengda. Design and implementation of weld position detection method based on range sensor[J]. Industrial Control Computer, 2014, 27(10):32-35.[DOI: 10.3969/j.issn.1001-182X.2014.10.014] [5] 傅琛. 复杂场景下视觉引导的机器人的运动控制[D]. 大连:大连理工大学, 2015. [6] 潘际銮. 现代弧焊控制[M]. 北京:机械工业出版社, 2000. -
期刊类型引用(4)
1. 王鹏博，张永强，惠亚军，王泽阳，伊日贵，王晓雄，张郢. 车厢结构用冷轧马氏体钢电阻点焊工艺性能研究. 电焊机. 2024(05): 117-123 . 
百度学术
2. 刘岩，刘兆真，陈永满，贺春林，鞠小龙. DP980双相钢CMT焊接接头组织及性能. 焊接. 2022(04): 48-53+64 . 百度学术
3. 高天洋，徐海卫，韩赟，田亚强，李红斌，陈连生. 基于相变产物构建DP1180相变动力学方程研究. 钢铁研究学报. 2022(10): 1136-1144 . 百度学术
4. 邵天巍，薛俊良，万占东，郭伟. QP980-DP980异种先进高强钢激光焊接头微观组织及力学性能. 焊接. 2019(07): 5-9+65 . 百度学术
其他类型引用(1)
计量
- 文章访问数: 663
- HTML全文浏览量: 11
- PDF下载量: 49
- 被引次数: 5
下载:
