| [1] |
丁耀根. 大功率速调管的设计制造和应用[M]. 北京： 国防工业出版社, 2010.[2] 周惦武, 田 伟, 徐少华, 等. 激光焊接镁/铝异种金属的显微组织与性能[J]. 稀有金属材料与工程, 2015, 44(10): 2440-2444.Zhou Dianwu, Tian Wei, Xu Shaohua, et al. Microstructure and mechanical properties of magnesium/aluminum alloy laser welding[J]. Rare Metal Materials and Engineering, 2015, 44(10): 2440-2444.[3] 陈德龙, 竺佩芳, 周光辉, 等. JH-1型激光焊接机及焊接工艺试验[J]. 激光与红外, 1988(4): 39-42.Chen Delong, Zhu Peifang, Zhou Guanghui, et al. JH-1 laser welding machine and welding tests[J]. Journal of laser and Infrared, 1988(4): 39-42.[4] 黄维玲, 游立德, 李家伟, 等. 电子枪组焊中激光焊接工艺参数与方法的研究[J]. 中国激光, 1994, 21(10): 840-844.Huang Weiling, You Lide, Li Jiawei, et al. Research of processing technology for assembly of CRT electron gun using pulsed laser welding[J].Chinese Journal of Lasers, 1994, 21(10): 840-844.[5] 金 亮. Ta/Mo异种金属激光焊工艺研究及数值模拟[D]. 广州: 华南理工大学, 2013.[6] 游德勇, 高向东. 激光焊接技术的研究现状与展望[J]. 焊接技术, 2008, 37(4): 5-9.You Deyong, Gao Xiangdong. Studies and prospects of laser welding technology[J]. Welding Technology, 2008, 37(4): 5-9.[7] Salminen A S, Kujanpaeae V P, Moisio T J I. Interactions between laser beam and fillermetal[J]. Welding Journal, 1996, 75(1): 9-13.[8] 秦国梁, 林尚扬. 激光焊接体能量及其对激光深熔焊缝熔深的影响[J]. 焊接学报, 2006, 27(7): 74-76.Qin Guoliang, Lin Shangyang. Laser welding volume energy and its influence on weld penetration in laser deep penetration welding[J]. Transactions of the China Welding Institution, 2006, 27(7): 74-76.[9] 虞 钢, 赵树森, 张永杰, 等. 异种金属激光焊接关键问题研究[J]. 中国激光, 2009, 36(2): 261-268.Yu Gang, Zhao Shusen, Zhang Yongjie, et al. Research on key issues of laser welding of dissimilar metal[J]. Chinese Journal of Lasers, 2009, 36(2): 261-268.[10] 冯志良, 赵金玉, 李海涛, 等. 电真空器件烘烤排气过程中残余气体质谱分析[J]. 真空科学与技术学报, 2014, 34(4): 325-328.Feng Zhiliang, Zhao Jinyu, Li Haitao, et al. Real-time mass spectroscopy study of residual gases in degassing of high power klystron[J]. Chinese Journal of Vacuum Science and Technology, 2014, 34(4): 325-328.[11] 李庆生, 阮存军, 赵 鼎, 等. X波段带状电子注速调管电子枪组件热分析[J]. 微波学报, 2010(8): 478-481.Li Qingsheng, Ruan Cunjun, Zhao Ding, et al. Thermal-stress analysis of the electon gun of X-band sheet beam klystron[J]. Journal of Microwaves, 2010(8): 478-481.[12] 达道安. 真空设计手册[M]. 北京: 国防工业出版社, 2004.[13] 付 俊, 黄 坚, 姚成武, 等. 铜钢激光对接焊研究[J]. 中国激光, 2009, 36(5): 1256-1260.Fu Jun, Huang Jian, Yao Chengwu, et al. Laser butt welding for copper-steel joint[J]. Chinese Journal of Lasers, 2009, 36(5): 1256-1260.
|
下载:
