| [1] |
Zou T X，Li D Y，Wu G H, et al. Yield strength development from high strength steel plate to UOE pipe[J]. Materials and Design，2016(87): 1107-1122.[2] 曹 睿, 冯 伟, 彭 云, 等. 980 MPa级高强钢焊接接头HAZ冲击性能的分析[J]. 焊接学报，2010, 31(8): 93-96.Cao Rui, Feng Wei, Peng Yun，et al. Analysison impact property of welded joint HAZ of 980 MPa high strength steel[J]. Transations of the China Welding Institution, 2010, 31(8): 93-96.[3] 魏金山，齐彦昌，彭 云，等. 热输入对800 MPa级超厚板窄间隙焊缝金属组织和性能的影响[J]. 焊接学报，2012, 33(6): 31-34.Wei Jinshan，Qi Yanchang，Peng Yun，et al. Effect of heat input on the microstructure and properties of weld metal welding in a 800 MPa grade heavy steel plate with narrow gap groove[J]. Transactions of the China Welding Institution，2012，33(6): 31-34.[4] Wang J F，Yang L J，Sun M S，et al. Effect of energy input on the microstructure and properties of butt joints in DP1000 steel laser welding[J]. Materials and Design，2016(90): 642-649.[5] Weglowski M S, Zeman M.Prevention of cold cracking in ultra-high strength steel Weldox 1300[J]. Archives of Civil and Mechanical Engineering，2014(14): 417-424.[6] Leitner M, Gerstbrein S, Ottersb?ck M, et al. Fatigue strength of HFM I-treated and stress-relief annealed high-strength steel weld Joints[J]. Procedia Engineering, 2015(133): 477-484.[7] 赵晓兵，何长红，彭 云, 等. 800 MPa级高强钢焊缝金属热处理组织与性能[J]. 焊接学报，2007, 28(7): 101-104.Zhao Xiaobing, He Changhong, Peng Yun, et al. Microstructure and Property of PWHT weld metal of 800 MPa grade low alloy steel[J]. Transactions of the China Welding Institution, 2007, 28(7): 101-104.[8] Feng R，Li S，Zhu X D，et al. Microstructural characterization and formation mechanism of abnormal segregation band of hot rolled ferrite/pearlite steel[J]. Journal of Alloys and Compounds，2015, 64(6): 787-793.[9] Sohns S，Leeb J，Lee，et al. Effect of annealing temperature on microstructural modification and tensile prope rties in 0.35C-0.5MN-5.8Al lightweight steel[J]. Acta Materialia, 2013(61): 5050-5056.[10] Zhao C, Song R B, Zhang L, et al. Effect of annealing temperature on the microstructure and tensile properties of Fe-10Mn-10AL-0.7C low-density steel[J]. Materials and Design，2016(91): 348-360.[11] 朱洪武，刘亚正，徐 盛，等. 退火工艺对钎具用钢22Si2MnCrNi2MoA带状组织的影响[J]. 北京科技大学学报，2013, 35(3): 312-318.Zhu Hongwu，Liu Yazheng，Xu Sheng，et al. Effect of annealing temperature on the banded strcture of 22Si2MnCrNi2MoA drill steel[J]. Journal of University of Science and Techonglogy Beijing，2013, 35(3): 312-318.[12] Ramazani A，Quade H，Abbasi M，et al. The effect of martensite banding on the mechanical properties and formability of TRIP steels[J]. Materials Science & Engineeing A，2016(651): 160-164.[13] 黄泽文，陶佑卿. 15SiMnVTi钢中粒状贝氏体回火组织与性能[J]. 西南交通大学学报，1983(14): 5-19.Huang Zewen，Tao Youqing. Tempering microstrcture and properties of granular bainite in 15SiMnVTi Steel[J]. Journal of Southwest Jiaotong University, 1983(14): 5-19.[14] 张恒磊，蔡庆伍，李晓林. 回火工艺对钒氮超低碳贝氏体钢组织性能的影响[J]. 材料热处理学报，2013, 34(8): 148-152.Zhang Henglei，Cai Qingwu，Li Xiaolin. Effect of tempering on microstructure and properties of hot-rolledvanadium and nitrogen microaoyed ultra-low carbon bainitic steel[J]. Transactions of Materals and Heat Treatment, 2013, 34(8): 148-152.[15] 杨庚蔚，雍岐龙，孙新军，等. 热处理工艺对1 500 MPa级低碳Nb-Ti低合金钢组织及性能的影响[J]. 材料热处理学报，2013，34(7): 65-72．Yang Gengwei，Yong Qilong，Sun Xinjun，et al. Effects of process on microstructure and mechanical properties of 1 500 MPa grade low carbon Nb-Ti low alloy steel[J]. Transactions of Materials and Heat Treatment，2013，34(7): 65-72.[16] 聂文金，尚成嘉，关海龙，等. 铁素体/贝氏体(F/B)双相钢组织调控及其抗变形行为分析[J]. 金属学报，2013, 48(3): 298-306.Nie Wenjin，Shang Chengjia，Guan Hailong，et al. Control of microstructure of ferrite/bainite(F/B)dual-phase steels and analysis of their resistance to deformation behavior[J]. Acta Metallurgica Sinica, 2013, 48(3): 298-306.[17] 蔡明晖，丁 桦，张建苏，等. 铁素体/贝氏体双相钢的形和断裂特性[J]. 材料研究学报，2009, 23(1): 83-88.Cai Minghui，Ding Huai，Zhang Jiansu，et al. Deformation and fracture characteristics of ferrite/bainite dual-Phase steelsl[J]. Chinese Journal of Materials Reasearch，2009, 23(1): 83-88.
|
下载:
