高级检索

考虑铝合金接头软化的焊接变形及残余应力预测方法

梁伟, 郭科峰, 龚毅, 卞功文

梁伟, 郭科峰, 龚毅, 卞功文. 考虑铝合金接头软化的焊接变形及残余应力预测方法[J]. 焊接学报, 2017, 38(5): 58-62. DOI: 10.12073/j.hjxb.20170513
引用本文: 梁伟, 郭科峰, 龚毅, 卞功文. 考虑铝合金接头软化的焊接变形及残余应力预测方法[J]. 焊接学报, 2017, 38(5): 58-62. DOI: 10.12073/j.hjxb.20170513
shu
LIANG Wei, GUO Kefeng, GONG Yi, BIAN Gongwen. High precision prediction method of residual stress and welding distortion of aluminum alloy sheet[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(5): 58-62. DOI: 10.12073/j.hjxb.20170513
Citation: LIANG Wei, GUO Kefeng, GONG Yi, BIAN Gongwen. High precision prediction method of residual stress and welding distortion of aluminum alloy sheet[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(5): 58-62. DOI: 10.12073/j.hjxb.20170513
shu

考虑铝合金接头软化的焊接变形及残余应力预测方法

  • 重庆交通大学 机电与车辆工程学院, 重庆 400074

基金项目: 国家自然科学基金资助项目（51375518）；教育部留学回国人员科研启动基金；先进焊接与连接国家重点实验室重点项目（AWJ-16-Z03）

High precision prediction method of residual stress and welding distortion of aluminum alloy sheet

  • College of Mechatronics &Vehicle Engineering, Chongqing Jiaotong University, Chongqing 400074, China

摘要

    摘要
  • 摘要: 针对铝合金焊接接头的软化问题，通过采用合理材料模型对该问题进行了描述，并在此基础上开发了相应的热-弹-塑性有限元计算方法来预测铝合金薄板的焊接变形和残余应力.以TIG重熔铝合金薄板为例，模拟分析了焊接过程中的温度场、残余应力和焊接变形.同时，采用试验方法测量了焊件的挠曲变形.结果表明，考虑软化现象的有限元数值计算结果与试验测量结果更吻合，验证了提出材料模型和所开发的有限元计算方法的有效性；对于接头软化较为明显的铝合金材料，进行焊接残余应力的数值模拟时有必要建立反映接头软化的材料模型.
    Abstract: In this paper, a new material model with considering softening phenomena in aluminum alloy welded joint was developed to accurately calculate welding residual stress and deformation. In the current study, the welding residual stress and distortion in a 6061 aluminum alloy bead-on joint performed by TIG welding process was simulated by using the developed computational approach. Meanwhile, the out-of-plane deformations were measured by experiment, and the measurements were used to verify the numerical results. The numerical results show that softening effect has a significant influence on longitudinal residual stress, which has a limited influence on transverse residual stress. It seems that the softening effect could only influence on welding deformation.
    • HTML全文
    • 参考文献(16)
  • [1] Ueda Y, Murakawa H, Ma L, Welding Deformation and Residual Stress Prevention[M]. Amsterdam: Elsevier, 2012.
    [2] 王 煜, 赵海燕, 吴 甦, 等. 电子束焊接数值模拟中分段移动双椭球热源模型的建立[J]. 机械工程学报, 2004, 40(2): 165-169. Wang Yu, Zhao Haiyan, Wu Su, et al. Establishment of segmented moving double ellipsoid heat source model in electron beam welding numerical simulation [J]. Chinese Journal of Mechanical Engineering, 2004, 40(2): 165-169.
    [3] 刘黎明, 迟鸣声, 宋 刚, 等. 镁合金激光-TIG复合热源焊接热源模型的建立及其数值模拟[J]. 机械工程学报, 2006, 42(2): 82-86. Liu Liming, Chi Mingsheng, Song Gang, et al. Numerical simulation of AZ31B magnesium alloy laser-TIG hybrid welding with new heat source model [J]. Chinese Journal of Mechanical Engineering, 2006, 42(2): 82-86.
    [4] Deng D, Murakawa H. Prediction of welding residual stress in multi-pass butt-welded modified 9Cr-1Mo steel pipe considering phase transformation effects [J]. Computational Materials Science, 2006(37): 209-219.
    [5] 胥国祥, 杜宝帅, 董再胜, 等. 厚板多层多道焊温度场的有限元分析[J]. 焊接学报, 2013, 34(5): 87-90,117. Xu Guoxiang, Du Baoshuai, Dong Zaisheng, et al. Finite element analysis of temperature field in multi-pass welding of thick steel plate [J]. Transactions of the China Welding Institution, 2013, 34(5): 87-89,117.
    [6] Sun J S, Wu C S. The effect of welding heat input on the weld pool behavior in MIG welding [J]. Science in China (Series E), 2002, 45(3): 292-299.
    [7] 张增磊, 史清宇, 刘 园, 等. 焊接数值模拟材料新模型的建立及应用[J]. 焊接学报, 2009, 30(2): 45-48, 155. Zhang Zenglei, Shi Qingyu, Liu Yuan, et al. Establishment and application of material models for numerical simulation of welding process [J]. Transactions of the China Welding Institution, 2009, 30(2): 45-48,155.
    [8] 张建强, 张国栋, 赵海燕, 等. 铝合金薄板焊接应力三维有限元模拟[J]. 焊接学报, 2007, 28(6): 5-9. Zhang Jianqiang, Zhang Guodong, Zhao Haiyan, et al. 3D-FEM numerical simulation of welding stress in thin aluminum alloy plate[J]. Transactions of the China Welding Institution, 2007, 28(6): 5-9.
    [9] 叶延洪, 何 静, 蔡建鹏, 等. 6061-T651铝合金薄板接头的焊接变形[J]. 中国有色金属学报, 2014, 24(10): 2435-2442. Ye Yanhong, He Jing, Cai Jianpeng, et al. Welding deformation of 6061-T651 AL alloy thin-plate joints [J]. The Chinese Journal of Nonferrous Metals, 2014, 24(10): 2435-2442.
    [10] 岳红杰, 赵海燕, 蔡志鹏, 等. 薄壁铝合金结构焊接应力变形数值模拟[J]. 机械工程学报, 2005, 41(2): 223-227. Yue Hongjie, Zhao Haiyan, Cai Zhipeng, et al. Welding residual stress and distortion simulation of thin aluminum structures [J]. Chinese Journal of Mechanical Engineering, 2005, 41(2): 223-227.
    [11] 鄢东洋, 史清宇, 吴爱萍, 等. 焊接数值模拟中以温度为控制变量的高效算法[J]. 焊接学报, 2009, 30(8): 77-80,117. Yan Dongyang, Shi Qingyu, Wu Aiping, et al. A high-efficient welding simulation method based on welding temperature [J]. Transactions of the China Welding Institution, 2009, 30(8): 77-80, 117.
    [12] 朱 浩, 陈 强, 陈剑虹. 热影响区几何尺寸对铝合金焊接接头变形及强度影响规律[J]. 焊接学报, 2012, 33(5): 77-81, 117. Zhu Hao, Chen Qiang, Chen Jianhong. Influence rule of HAZ geometrical dimension to aluminum alloy joint' deformation and strength [J]. Transactions of the China Welding Institution, 2012, 33(5): 77-81,117.
    [13] 吕晓春, 雷 振, 张 健, 等. 高速列车6005A-T6铝合金焊接接头软化分析[J]. 焊接学报, 2014, 35(8): 25-29, 114. Lv Xiaochun, Lei Zhen, Zhang Jian, et al. Study on the softening of 6005A-T6 aluminum alloy welding joints for high-speed train [J]. Transactions of the China Welding Institution, 2014, 35(8): 25-19,114.
    [14] 王宗茂, 王建平, 吴 飞. 6061铝合金焊接变形的数值分析[J]. 山东机械, 2004(6): 36-38. Wang Zongmao, Wang Jianping, Wu Fei. Numerical analysis on welding deformation of 6061 aluminum alloy[J]. Modern Manufacturing Technology and Equipment, 2004(6): 36-38.
    [15] 朱 亮, 陈剑虹. 力学性能不均匀焊接接头的强度预测[J]. 焊接学报, 2005, 26(5): 13-16. Zhu Liang, Chen Jianhong. Prediction of tensile properties of welded joint with mechanical heterogeneity[J]. Transactions of the China Welding Institution, 2005, 26(5): 13-16.
    [16] Zuo X K, Chao Y J. Effects of temperature-dependent material properties on welding[J]. Computers and Structures, 2002, 80(11): 967-976.
    • 相关文章
    • 施引文献(15)

  • 期刊类型引用(7)

    1. 胡铭汇，赖少波，郑文健，冯道臣，闫德俊，王宇，王文军，俞臻，杨建国. 高镁铝合金焊接接头软化机制研究及软化模型的建立. 电焊机. 2024(12): 8-15 . 百度学术
    2. 李忠星，康登，赵亚飞. 随焊冲击抑制6061-T6铝合金接头软化行为研究. 铝加工. 2023(06): 65-68 . 百度学术
    3. 付宁宁，经中涛. 地铁车体总成关键焊缝焊后变形量工艺研究. 大连交通大学学报. 2021(01): 67-70 . 百度学术
    4. 梁伟，孙晓露. 基于切断技术的固有变形获取方法研究. 机械工程学报. 2020(08): 92-98 . 百度学术
    5. 毛镇东，阚盈，姜云禄，韩晓辉，陈怀宁. 异种铝合金电阻点焊接头全场残余应力研究. 机械工程学报. 2020(16): 84-90 . 百度学术
    6. 杨少红，魏昭祎，黄方. 船用铝合金T型接头的焊接残余应力仿真分析. 海军工程大学学报. 2020(04): 22-25+42 . 百度学术
    7. 赵连玉，卢燕超，刘振忠，张伯荣，曹元，李俊伟. 铝合金盒体焊接残余应力及变形分析. 天津大学学报(自然科学与工程技术版). 2018(05): 483-490 . 百度学术

    其他类型引用(8)

    • 资源附件(0)
计量
  • 文章访问数:  422
  • HTML全文浏览量:  1
  • PDF下载量:  293
  • 被引次数: 15
出版历程
  • 收稿日期:  2015-05-04

目录

摘要
HTML全文
    参考文献(16)
    相关文章
    施引文献(15)
    资源附件(0)

    /

    返回文章
    返回

    网站版权 © 焊接杂志社焊接学报编辑部电话：0451-86323218地址：哈尔滨市松北区创新路2077号

    本系统由 北京仁和汇智信息技术有限公司 开发  百度统计