Advanced Search
LU Quanbin, LONG Weimin, WANG Xin, DU Quanbin. Influence of trace Sc on intergranular corrosion properties of Al-Mg-Mn-Cr-Ti alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(7): 97-100.
Citation: LU Quanbin, LONG Weimin, WANG Xin, DU Quanbin. Influence of trace Sc on intergranular corrosion properties of Al-Mg-Mn-Cr-Ti alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(7): 97-100.

Influence of trace Sc on intergranular corrosion properties of Al-Mg-Mn-Cr-Ti alloy

More Information
  • Received Date: August 06, 2015
  • The effect of trace Sc on the intergranular corrosion properties of Al-Mg-Mn-Cr-Ti alloy was investigated by intergranular corrosion test, the the microstructure of samples was examined with OM, SEM and EDS. The experimental results show that the addition of trace Sc could decrease the intergranular corrosion sensitivity and refine the grain size of as-cast Al-Mg-Mn-Cr-Ti alloy. The addition of trace Sc could reduce the gathering of Fe, Si impurities around grain boundary and modify the morphology and distribution of β-phase. It is found that the addition of Sc has obvious effect on intergranular corrosion property of Al-Mg-Mn-Cr-Ti alloy because Sc reduces the electrochemical corrosion in grain boundary.
  • Yang Junjun,Nie Zuoren,Jin Tounan,et al. Effect of trace rare earth element Er on high pure Al[J].Transaction of Nonferrous Metals Society of China,2003,13(5):1035-1039.
    Song Min,Xiao Daihong,Zhang Fuqin.Effect of Ce on the thermal stability of the phase in an Al-Cu-Mg-Ag alloy[J].Rare Metals,2009,28(2):156-159.
    Hosseinifar Mehdj,Dmitri V,Malakhov.Effect of Ce and La on microstructure and properties of a 6 xxx series type aluminum alloy[J].Journal of Materials Science,2008,43:7157-7164.
    潘青林,尹志民,邹景霞,等.微量Sc在Al-Mg合金中的作用[J].金属学报,2001,37(7):749-753.Pan Qinglin,Yin Zhimin,Zou Jingxia,et al.Effects of minor Sc addition on microstructure and tensile property of Al-Mg alloy[J].Acta Metallurgica Sinica,2001,37(7):749-753.
    Lathabai S,Lioyd P G.The effect of scandium on the microstructure,mechanical properties and properties and weldability of a cast Al-Mg alloy[J].Acta Materialia,2002,50:4275-4292.
    李绍禄,潘青林,陈显明.Sc和Ti复合微合金化对Al-Mg合金组织与性能的影响[J].兵器材料科学与工程,2003,26(1):11-15.Li Shaolu,Pan Qinglin,Cheng Xianming.Effect of Sc and Ti additions on microstructurs and tensile properties of Al-Mg alloys[J].Ordnance Material Science and Engineering,2003,26(1):11-15.
    Goswami R,Spanos G,Rao P S,et al.Precipitation of the β-phase in Al5083[J].Materials Science and Engineering A,2010,527(4-5):1089-1095.
    Jain S,Hudson J L,Scully J R.Effects of constituent particles and sensitization on surface spreading of intergranular corrosion on a sensitized AA5083 alloy[J].Electrochimica Acta,2013,108:253-264.
    Svenningsen G,Larsen M H,Walmsley J C,et al.Effect of artificial aging on intergranular corrosion of extruded AlMgSi alloy with small Cu content[J].Corrosion Science,2006,48(6):1528-1543.
  • Related Articles

    [1]SONG Fengyu, ZHOU Laihong, LUN Wenshan, HUANG Zengyang, BO Xiangyang. Study on grain growth behavior of acicular ferrite in weld deposited metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(5): 23-28. DOI: 10.12073/j.hjxb.20200929003
    [2]LIU Zhengjun, WU Dan, SU Yunhai. Effect of boron element on formation of acicular ferrite in weld metal with flux cored wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(12): 19-24. DOI: 10.12073/j.hjxb.2018390291
    [3]SHI Yunzhe, WANG Gangang, CHENG Peng, ZHANG Wei, ZHAO Jiancang, SONG Libin. Influence of heat affected zone microstructure of 12Cr1MoVG reheat cracking susceptibility[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(11): 65-68.
    [4]CHEN Qianqian, LI Dong, HE Congcong, YU Zhishui. Microstructure difference analysis of large thickness welded joint with EBW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(9): 79-82.
    [5]ZHENG Kai, ZHAO Dajun, ZHANG Xuelian. Performance of dissimilar metal weld between SA335P91 and 12Cr1MoV steels in ultra(ultra)supercritical thermal power units[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (8): 77-80.
    [6]WANG Xuyou, LEI Zhen, MAO Hui, DU Bing, . Appearance of weld and impact toughness for the joints of ferrite stainless steel by laser-MAG hybrid welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (12): 21-25.
    [7]HUANG Anguo, YU Shengfu, XIE Mingli, LI Zhiyuan, ZHANG Guodong. Acicular ferrite microstructure of weld metal for low-alloy steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (3): 45-48.
    [8]Wang Shiliang, Hu Weiping, Tang Bogang. INCLUSIONS AND NUCLEATION OF ACICULAR FERRITE IN WELD METALS IN HSLA[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1990, (2): 81-90.
    [9]Li Ailing, Zhai Yang, Yan Cheng, Chen Jianhong, Nobuya lwamoto. THE INFLUENCE OF ALLOY ELEMENTS ON THE FORMATION OF ACICULAR FERRITE IN WELD METAL[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1989, (3): 163-171.
    [10]Liu Tingcai. WELDABILITY OF DUPLEX FERRITIC-AUSTENITIC STAINLESS STEELS[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (4): 213-222.

Catalog

    Article views (461) PDF downloads (205) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return