Advanced Search

Finite element simulation of the restraint intensity of rigid butt-jointed cracking specimen and VRC specimen
JING Hongyang1,2, XU Jingjing1,2, XU Lianyong1,2, HAN Yongdian1,2, ZHAO Lei1,2
2018, 39(8): 1-5. DOI: 10.12073/j.hjxb.2018390190
Abstract
Influence of friction stir keyholeless spot welding process parameters on the diffusion degree of AZ31B Mg-steel
WANG Xijing, CHE Wenbin, LIU Xiao, ZHANG Liangliang
2018, 39(8): 6-10. DOI: 10.12073/j.hjxb.2018390191
Abstract
Continuous drive friction welding and post welding heat treatment of 7A04 aluminum alloy and 304 stainless steel
FENG Jian1, HAN Jing1, ZHANG Xuemei2, DAI Guangze1, HAN Yuejiao3
2018, 39(8): 11-17. DOI: 10.12073/j.hjxb.2018390192
Abstract
Fatigue cumulative damage assessment of longitudinal fillet welded gusset in welded frame based on different stress approaches
ZHOU Zhangyi, WANG Yuzhou, YANG Xin
2018, 39(8): 18-22. DOI: 10.12073/j.hjxb.2018390193
Abstract
Stress and strain analysis of embedded substrate micro-scale ball grid array solder joint under three point bending
YIN Rui1, HUANG Chunyue1, HUANG Genxin1, LU Liangkun1, LIANG Ying2
2018, 39(8): 23-27. DOI: 10.12073/j.hjxb.2018390194
Abstract
Effect of brazing temperature on interfacial microstructure and properties of Ti60/Si3N4 brazed joints
HU Tianyi1,2, LEI Yuzhen2, HU Shengpeng2, SONG Xiaoguo1, WANG Chunyu2
2018, 39(8): 28-31,37. DOI: 10.12073/j.hjxb.2018390195
Abstract
Structural design and kinematics modeling of welding robot system for box-type steel structure
GUO Jichang, ZHU Zhiming, CHEN Minhe, LI Qiuyu
2018, 39(8): 32-37. DOI: 10.12073/j.hjxb.2018390196
Abstract
Characteristic of electron beam welded Cu46Zr46Al8 BMGs
WANG Ting1,2, SHI Zhiyuan1,2, LI Ning1, SONG Kaikai3, FENG Jicai1,2
2018, 39(8): 38-41. DOI: 10.12073/j.hjxb.2018390197
Abstract
Study on microstructure and properties of BAg17CuZnSn-xCe filler metals
MA Chaoli1, XUE Songbai1, WANG Bo1, WANG Jianxin2, LONG Weimin3
2018, 39(8): 42-46. DOI: 10.12073/j.hjxb.2018390198
Abstract
Properties and mechanism of nano Al particles reinforced Sn1.0Ag0.5Cu solders
SUN Lei1, CHEN Minghe1, XIE Lansheng1, ZHANG Liang2, ZHU Jiandong3
2018, 39(8): 47-50. DOI: 10.12073/j.hjxb.2018390199
Abstract
Iterative reduction optimization algorithm for quality of welding procedure based on constraint time
LUO Zhiyong1,2, WANG Peng1, YOU Bo2, LIU Jiahui1, MIAO Shidi1
2018, 39(8): 51-54. DOI: 10.12073/j.hjxb.2018390200
Abstract
Laser welding performance and process of DP780 galvanized steel
HUANG Lei1, CHEN Xizhang1, MA Hongbo2, LIN Tao2
2018, 39(8): 55-58. DOI: 10.12073/j.hjxb.2018390201
Abstract
Ultrasonic evaluation of automobile spot welding based on minimum entropy deconvolution
HE Zhicheng, JI Yanjun, CHENG Aiguo
2018, 39(8): 59-65. DOI: 10.12073/j.hjxb.2018390202
Abstract
Effects of Sb and rare earth on properties of Zn-10Al based brazing filler metals and brazed joints
LIU Shuying1,2, ZHANG Dongdong1, TAN Chao3, CHU Bowen1, LI Zhuoyue1
2018, 39(8): 66-71. DOI: 10.12073/j.hjxb.2018390203
Abstract
Resaerch of laser cladding performance of engine blades
XU Guojian1, GUO Yunqiang1, LI Chunguang2, CHANG Lili3, QIU Xiaojie4
2018, 39(8): 72-76. DOI: 10.12073/j.hjxb.2018390204
Abstract
Microstructure and tensile properties of selective laser melting forming 316L stainless steel
YIN Yan1, LIU Pengyu1, LU Chao2, XIAO Mengzhi1,3, ZHANG Ruihua2,3
2018, 39(8): 77-81. DOI: 10.12073/j.hjxb.2018390205
Abstract
Mechanical properties and microstructures of laser coaxially assisted friction stir welded 2219-T6 aluminum alloy
ZHANG Jing, FENG Xiaosong, XU Hui, GAO Jiashuang
2018, 39(8): 82-86. DOI: 10.12073/j.hjxb.2018390206
Abstract
Investigation on the cause of the hot cracking in GTA welding of thick copper plates
YU Hanchen1, YAN Han2, LUAN Tianmin1, FAN Wei1, ZHANG Huiwen3
2018, 39(8): 87-91. DOI: 10.12073/j.hjxb.2018390207
Abstract
Effects of filler wire on microstructure and mechanical properties for fiber laser welding 6A02 aluminum alloy
XU Fei, CHEN Li, GUO Luyun
2018, 39(8): 92-96. DOI: 10.12073/j.hjxb.2018390208
Abstract
Temperature control method of hot bar bonder based on dynamic compensation for thermocouple
ZENG Jiaquan1, CAO Biao1, YANG Kai2
2018, 39(8): 97-101. DOI: 10.12073/j.hjxb.2018390209
Abstract
Properties of Cr13 steel joints welded by nickel-based and austenite welding materials
ZHANG Yazhi1, ZHANG Guodong2, YANG Hui2, WANG Qiyu2
2018, 39(8): 102-107. DOI: 10.12073/j.hjxb.2018390210
Abstract
Hand-eye calibration of welding robot based on the constraint of spatial line
ZHENG Jian, ZHANG Ke, LUO Zhifeng, WANG Zhigang
2018, 39(8): 108-113. DOI: 10.12073/j.hjxb.2018390211
Abstract
Influence of process parameters on microstructure and properties of IC10 single crystal TLP joints
CHAI Lu, HOU Jinbao, ZHANG Sheng
2018, 39(8): 114-118. DOI: 10.12073/j.hjxb.2018390212
Abstract
Ultrasonic phased array inspection on welded crack of austenitic dissimilar ateel with thin wall and small diameter tube
JIANG Ye1, WANG Dong1, QIN Xiaoyang2, LIU Wensheng1, JIA Shaowei1
2018, 39(8): 119-122. DOI: 10.12073/j.hjxb.2018390213
Abstract
State-of-arts of electron beam freeform fabrication technology
CHEN Guoqing, SHU Xi, ZHANG Binggang, FENG Jicai
2018, 39(8): 123-128. DOI: 10.12073/j.hjxb.2018390214
Abstract

Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics