Advanced Search

3D transient simulation and computation for electron beam energy density spatial distribution
SHEN Chunlong, ZHANG Meiping, ZHOU Qi, XU Jianhua, WANG Kehong
2010(9): 1-4.
Abstract PDF
Extraction method for welding seam deviation based on rotating arc sensor
HONG Bo, ZHOU Kui, LI Xiangwen, PAN Jiluan, QU Yuebo
2010(9): 5-8.
Abstract PDF
Base metal melting and molten pool forming in ultra-narrow gap with constricted arc by flux strips
ZHU Liang, JIN Jiang, MIAO Hongli, Li Yuanbo
2010(9): 9-12.
Abstract PDF
Analysis and application of operating system embedded in arc welding inverter
ZHANG Hongbing, HUANG Shisheng, ZHOU Yiqing, HE Kuanfang
2010(9): 13-16.
Abstract PDF
Effects of current phase relations on weld bead formation for twin-wire co-pool pulsed MAG welding
WEN Yuanmei, HUANG Shisheng, WU Kaiyuan, MIAO Zhengping
2010(9): 17-20.
Abstract PDF
An optimization algorithm for combination inverse kinematics problems of welding robot in complex trajectory
ZHOU Youhang, ZHANG Jianxun, DONG Yinsong
2010(9): 21-24.
Abstract PDF
Microstructures and properties of CO2 laser welded 600 MPa DP steel
WANG Wenquan, MA Kai, SUN Daqian, KANG Chungyun
2010(9): 25-28.
Abstract PDF
Control system designed for all position pipe welding device
LI Haichao, DU Lin, DONG Na, GAO Hongming
2010(9): 29-32.
Abstract PDF
Research on TIG repairing technology for ZM6 magnesium alloy casting
WANG Xin, YANG Chuang, FENG Jicai
2010(9): 33-36.
Abstract PDF
Effect of pulse current frequency on microstructure and mechanical properties of 2219 aluminum alloy weld joints
CONG Baoqiang, QI Bojin, LI Wei, YANG Mingxuan
2010(9): 37-40.
Abstract PDF
Formation characteristics of Ni/Ti intermetallics through annealing of layered Ni/Ti
ZHOU Yong, YANG GuanJun, WU Xian, LI Changjiu
2010(9): 41-44.
Abstract PDF
Study of digital push-pull CO2 welding system
LU Zhenyang, YAN Sibo, YANG Shuai, LIU Jia
2010(9): 45-48,52.
Abstract PDF
Study on structures and properties of part made by micro-plasma arc direct metal formation
XIANG Yonghua, XU Binshi, LV Yaohui
2010(9): 49-52.
Abstract PDF
Cracking formation mechanism of mild steel parts fabricated by surfacing rapid forming
LI Chao, LIANG Yuanyuan, SHEN Canduo, ZHU Sheng
2010(9): 53-56.
Abstract PDF
Effect of loading rate on shear strength of SnAgCu solder joint
LU Wei, ZHANG Ning, SHI Yaowu, LEI Yongping
2010(9): 57-60.
Abstract PDF
Effect of vanadium on property of Fe-Cr-C hardfacing alloy
WANG Zhihui, HE Dingyong, YU Changli, JIANG Jianmin
2010(9): 61-64.
Abstract PDF
Simulation of temperature field and residual stress field of thin inner layer on butt welding of clad pipe
YU Jianrong, HE Xiaoxiang, WU Bo, CHEN Haiyang, LI Xiaodong
2010(9): 65-68.
Abstract PDF
Microstructure characteristic and performance of bonding interface between titanium alloy/copper/GCr15
LIU Shuying, ZHANG Guifeng, LIU Guangbao, XU Peili, WANG Yawei
2010(9): 69-72,76.
Abstract PDF
Heat source modeling and power density analysis for vacuum electron beam welding
LUO Yi, XU Huibin, LI Chuntian, WU Guangfeng
2010(9): 73-76.
Abstract PDF
Microstructure investigation of Nd:YAG laser welded 5A90 aluminium-lithium alloys
CUI Li, LI Xiaoyan, HE Dingyong, CHEN Li, GONG Shuili
2010(9): 77-80,84.
Abstract PDF
Welding TC4 thin plates by revolution pressing in welding process
ZHANG Yong, YANG Jianguo, LIU Xuesong, FANG Hongyuan
2010(9): 81-81.
Abstract PDF
Electron beam brazing repair of K465 Ni-base superalloy blades
WANG Gang, CHEN Guoqing, ZHANG Binggang, FENG Jicai, LIU Chenglai
2010(9): 85-88.
Abstract PDF
Effect of laser power on welding process stability of Nd:YAG laser-short circuit MAG hybrid welding
WANG Wei, LIN Shangyang, WANG Xuyou, LEI Zhen
2010(9): 89-92.
Abstract PDF
Effect of Al content on properties of Zn-Al filler metal
ZHANG Man, XUE Songbai, DAI Wei, LOU Yinbin, WANG Shuiqing
2010(9): 93-96.
Abstract PDF
Fracture behavior of mismatching welded joint with surface crack
ZOU Jiquan, JING Hongyang, XU Lianyong
2010(9): 97-100.
Abstract PDF
Numerical simulation for explosive welding process of metal plate
WANG Huhe, TONG Zheng
2010(9): 101-104,108.
Abstract PDF
Research on slicing algorithm of worn components model in flexible remanufacturing based on welding robot
ZHOU Guoli, ZHANG Guangjun, YIN Ziqiang, PANG Huachong
2010(9): 105-108.
Abstract PDF
Influences of Nd:YAG laser+CMT arc hybrid horizontal welding parameters on weld appearance
LIU Xiyang, SUN Fenglian, WANG Xuyou, WANG Wei, LEI Zhen
2010(9): 109-112.
Abstract PDF

Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics