Advanced Search

column
Effects of thermal cycling on shear strength and microstructures of soldered joints of ceramic ball grid array package
XUE Song-bai, HU Yong-fang, YU Sheng-lin, WU Yu-xiu
2006(6): 1-4.
Abstract
Microstructures of W-17Co coating produced by plasma melt sprayingⅡ
GUO Mian-huan, LIU Ai-guo, ZHAO Min-hai, QI Hai-qun
2006(6): 5-8.
Abstract
Quality evaluation of ultrasonic brazing of aluminum matrix composites
LUAN Yi-lin, GANG Tie, YAN Jiu-chun
2006(6): 9-12.
Abstract
Seam tracking in metal active-gas welding based on wavelet transform
XUE Jia-xiang, LIU Xiao, ZHANG Li-ling, WANG Zhen-min
2006(6): 13-16.
Abstract
Muti-walled carbon nanotubes reinforced aluminum matrix composites prepared by laser casting
YUAN Xiao-min, YAN Jia-wu, HE Yi-zhu
2006(6): 17-20.
Abstract
Forced cooling frictton stir welding process
JIAN Bo, DU Sui-geng, FU Li
2006(6): 21-24.
Abstract
Image processing in welding seam tracking based on single-stripe laser
LIU Xi-wen, WANG Guo-rong, SHI Yong-hua
2006(6): 25-28,32.
Abstract
Analysis of interfacial reactions between Sn-37Pb and Ni by phase diagram calculation method
SUN Feng-lian, LIANG Ying, WANG Li-feng
2006(6): 29-32.
Abstract
Numerical simulation of fluid flow field in plasma arc welding with 3-D static conical heat source
LIU Wang-lan, HU Sheng-sun, MA Li
2006(6): 33-36.
Abstract
Preparation of deposited coating of Fe-Al inter metallic compound by laser cladding
CHENG Guang-ping, HE Yi-zhu
2006(6): 37-40.
Abstract
Grain refinement mechanism of gas tungsten arc welded joint of tantalum thin walled tube
ZHOU Fang-ming, QIAN Yi-yu, ZHANG Jing, LI GUI-peng
2006(6): 41-44,48.
Abstract
Penetration control system for keyhole pulse plasma arc welding based on reflecting plasma-flame voltage
SONG Dong-feng, HU Sheng-sun, HAN Jian, ZHU Yu-xin
2006(6): 45-48.
Abstract
Influence of spraying distance of ceramic soft wire flame spraying on properties of layer
QI Hai-qun
2006(6): 49-52.
Abstract
Active flux for austenitic stainless steel tungsten inert-gas welding
HU Li-mu, HU Bo, GUO Cong-sheng, WANG Yong-shan, YANG Qi
2006(6): 53-55,70.
Abstract
Coarse-grained heat affected zone microstructure and toughness of copper-bearing age-hardening steels
CHAI Feng, YANG Cai-fu, ZHANG Yong-quan, SU Hang, XU Zhou
2006(6): 56-60.
Abstract
Key joining technique of components under high heat flux of plasma
TAN Mo-qiang, CHEN Jun-ling
2006(6): 61-63,66.
Abstract
Effevt of V on intergranular corrosion resistance of austenite weld metal
ZHANG Tian-hong
2006(6): 64-66.
Abstract
Variation of structural damping and effectiveness evaluation of vibratory stress relief
RAO De-lin, CHEN Li-gong, NI Chun-zhen, Wang De-zhong
2006(6): 67-70.
Abstract
Databese establishment of aluminium alloy spot welding on-line momtor
LI Ming-jiang, SONG Yong-lun, ZHANG Jun, ZHANG Wan-chun
2006(6): 71-74.
Abstract
Numerical simulation of 3D friction stir welding process
ZHAO Yan-hua, LIN San-bao, HE Zi-qiu, WU Lin
2006(6): 75-78.
Abstract
Real-time monitoring for robotic CO2 welding based on arc sensor
HU Jia-kun, GAO Jin-qiang, WU Chuan-song
2006(6): 79-82.
Abstract
Influence of interaction among agglomerative flux components on melting temperature of flux
SUI Shao-hua, SONG Tian-ge, LIU Zhi-qiang, CAI Wei-wei
2006(6): 83-86.
Abstract
Property analysis of submerged arc and self-shield fluxed-cored welding wires sufacing metal with ultralow carbon and nitrogen solid solution processing
WANG Qing-bao, LIU Jing-feng, SHEN Feng-gang
2006(6): 87-90.
Abstract
Modeing and simulation of digital signal processor-based pulsed metal inert-gas welding digital control system
HAN Jing-hua, SHAN Ping, HU Sheng-sun, LU Ya-jing
2006(6): 91-94.
Abstract
Repairing technique of regular cracks for steel light-hydrocarbon spherical tanks in daqing and jilin zone
ZHENG Qi-wen, ZHANG Wei-bo, ZHAI Wei-hong, XU Lan-ying, YUAN Li-zhong, ZHENG Ben-he
2006(6): 95-100.
Abstract
Optimization of parameters for narrow gap SAW using fine welding wire
LU Qing-hua, CHEN Li-gong, NI Chun-zhen
2006(6): 101-103,107.
Abstract
Temperature field numerical simulation of YAG-MIG hybrid welding process for thick aluminum alloy plate
JIANG You-qing, GU Lei, LIU Jian-hua
2006(6): 104-107.
Abstract
Review and prognosis of state of arts on remote welding teleoperation
LI Hai-chao, WU Lin, GAO Hong-ming, ZHANG Guang-jun
2006(6): 108-112.
Abstract